Edco BTWSG20 UM Manual

BTWSG20 UM
Power on/off:
1.Power On: take out the earbuds from charging case, auto power on or long touching the
multi-function until the led in blue.
2.Power off: Put the earbuds back to charging case, auto power off and charging long, touching the
multi-function until the led flashing in Red and lighting off
Pairing:
1. Take out from charging case, earbuds auto paring, then search bluetooth match name"BTWSG20"
on your Cell phone, and pair to the Cell phone.
2. LED red blue light flash while pairing
3 .LED light off when pair to cell phone successfully.
Answer/refuse call
Answer call: short touch either earbud, touch again hang up call
refuse call: long touch 2 seconds either earbuds.
Play music:
1. Short touch either earbud to pause
2. Triple short touch "R" earbud to play next song, Triple short touch "L" earbud to play Previous
song, Volume + to press R sides button 2 times,Volume – to press L sides button 2 times.
3. Long touch 2 seconds on either earbud to wake voice assistant.
Charging:
1. Put the earbuds to the charging case, auto charging.
2. Inset the cable to Charge for the charging case, LED light on while charging,
and light off , charging complete.
Earbuds and Charging Case Technical details:
Pairing Bluetooth name : BTWSG20
Bluetooth Version: 5.1
Wireless Support Protocol: A2DP,AVRCP,HSP,HFP
Earbud Battery capacity: 30mAh*2
Charging case Battery capacity: 230mAh
Charging time: 1-2 Hour
Charging Port: Type-C