Edco BTWS300 User Manual

BTWS300 UM
Power on/off:
1.Power On: take out the earbuds from charging case, auto power on or long touching the
multi-function until the led in red and blue.
2.Power off: Put the earbuds back to charging case, auto power off and charging, long touching the
multi-function until the led flashing in Red and lighting off
Pairing:
1. Take out from charging case, earbuds auto paring, then search bluetooth match name" BTWS300"
on your Cell phone, and pair to the Cell phone.
2. LED light flash red and blue while pairing
3 .LED light off when pair to cell phone successfully.
Answer/refuse call
Answer call: short touch either earbud, touch again hang up call
refuse call: long touch 2 seconds either earbuds.
Play music:
1. Short touch either earbud to pause
2. Double short touch "L" earbud to play next song, Double short touch "R" earbud to play Previous
song. Triple short touch "L" earbud to volume +, Triple short touch "R" earbud to volume – .
3. Long touch 2 seconds on either earbud to wake voice assistant.
Charging:
1. Put the earbuds to the charging case, auto charging.
2. Inset the cable to Charge for the charging case, LED Red light on while charging,
and light off , charging complete.
Earbuds and Charging Case Technical details:
Pairing Bluetooth name : BTWS300
Bluetooth Version: 5.1
Wireless Support Protocol: A2DP,AVRCP,HSP,HFP
Earbud Battery capacity: 50mAh*2
Battery capacity: 2000mAh
Charging time: 1-2 Hour
Charging Port: Micro USB