All manuals and user guides at all-guides.com PRODUCT FEATURES FEATURES Fully assembled Alpha 250Q Aluminum Carrying Case Graupner C-Props (2 sets) mz-12 6ch telemetry radio LiPo battery charger 3S 1500 mAh LiPo battery AC Power cable ALPHA 250Q SPECIFICATIONS ...
All manuals and user guides at all-guides.com Telemetry (RTF) Fail Safe MZ-12 RADIO SETUP STEP ONE: Go to the “model mem.” menu and select a new model and give it a distinct name. REV 1...
Page 10
All manuals and user guides at all-guides.com STEP TWO: Go to the “m.type+quick” menu and select “model type”. Setup the motor at C1 to “idle re.” and the cutoff switch (motor on/off) to S1. Also note the model settings STEP THREE: Go to the “cont. sett.” menu and assign channel 5 to switch S3 to control attitude and rate mode.
All manuals and user guides at all-guides.com STEP SEVEN: Go to the “fail safe” menu and review the fail safe setting for your new model. Never fly without having your fail safe settings stored on your radio system. Please read your manual carefully as to how to use and setup this important setting.
All manuals and user guides at all-guides.com Transmitter Setup STEP ONE: Setup your transmitter for throttle hold and flight mode – Attitude or Rate mode Main settings STEP TWO: Select your multicopter type and calibrate the ESC’s. Make sure that your propellers are disconnected from your motors! REV 1...
Page 16
All manuals and user guides at all-guides.com REV 1...
All manuals and user guides at all-guides.com Roll and Nick PID settings STEP FOUR: These are optional settings which should be changed with care and only after you have familiarized yourself with your Multicopter flight performance. REV 1...
Need help?
Do you have a question about the 16520.HoTT and is the answer not in the manual?
Questions and answers