Page 2
Ready for your rst ride? Ready for your rst ride? With just 8 steps, assembling a CAROL Bike yourself is simple, and With just 8 steps, assembling a CAROL Bike yourself is simple, and should take no more than 45 minutes.
Troubleshooting Troubleshooting Positioning your bike Positioning your bike Safety information Safety information How to assemble CAROL Bike 2.0 How to assemble CAROL Bike 2.0 Feet adjustment Feet adjustment Step 1: Front stabilizer assembly Step 1: Front stabilizer assembly Handlebar and seat adjustment...
Page 5
CAROL – the bike that gets CAROL – the bike that gets Bike Bike Grade Grade Fully commercial-grade exercise bike. Built for professional gyms Fully commercial-grade exercise bike. Built for professional gyms Heavy-duty, powder-coated steel frame Heavy-duty, powder-coated steel frame...
At NO time should pets or children under the At NO time should pets or children under the bike. bike. age of 10 be closer to CAROL than 3m/10 age of 10 be closer to CAROL than 3m/10 • •...
Page 7
Model: CAROL Bike 2.0. Maximum load: 150kgs/330lbs. Date of production: 2022-08. Standard: ASTM Model: CAROL Bike 2.0. Maximum load: 150kgs/330lbs. Date of production: 2022-08. Standard: ASTM...
WARNING! are carried out by two people. are carried out by two people. It is best to unpack the contents of your CAROL delivery where you It is best to unpack the contents of your CAROL delivery where you •...
Page 9
Touch screen tablet Touch screen tablet Flywheel Flywheel Power supply connector Power supply connector wheels wheels CAROL CAROL...
CAROL Bike assembly STEP 3 Pedals assembly • A ach the pedals (35R/35L) into the crank arms (31R/31L). Each pedal is marked with the le er R (right) or L (left) to denote the side of the bike they t.
CAROL Bike assembly STEP 5 Fi ing the handlebars Inse the 4 s crews (104) into the handlebar, gently rock • the handlebars if needed to get the screws sta ed, turning with FINGERS FIRST to get the screws sta ed. Thread the screws in a few turns before using the Allen key.
CAROL Bike assembly STEP 8 STEP 8 STEP 8 Se ing up the power supply • • The bike is powered by a 12V 5A supply (pictured). • • • • • • • • • • Cleats CAROL CAROL...
After a ride the acan review a summary of ride data and using the (i) information bu on read a After a ride the acan review a summary of ride description of the data. data and using the (i) information bu on read a description of the data. CAROL...
Page 16
Wi-Fi and ge ing sta ed Se ing up Wi-Fi Ge ing Sta ed CAROL CAROL...
Page 22
There are cleat at a achments that will t on the underside of your pedals. This Shimano mountain bike SPD cleat SM-SH51 connection system is very common. They are compatible with cycling shoes from many manufacturers. Toe strap Toe strap CAROL CAROL...
Page 23
The resistance system on CAROL Bike has a durable belt drive transmission system, with a free wheel clutch driving the " ywheel. The free wheel allows you to stop pedaling at any time and safely disembark the bike even if the " ywheel is turning.
Page 24
Any and all pa s removal or replacement must be pe ormed by a CAROL approved service technician. • Do not use your CAROL bike if there are any signs of damage, or if there are any worn or broken pa s until repaired. •...
Space requirement 54'' x 45'' Maximum weight 330 lbs Toe strap Model: CAROL Bike 2.0. Maximum load: 150kgs/330lbs. Date of production: 2022-08. Standard: ASTM products are being used in the vicinity of the 137cm x 113cm 150 kg Team CAROL •...
Need help?
Do you have a question about the Bike 2.0 and is the answer not in the manual?
Questions and answers