Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HMD Skyline
Summary of Contents for HMD Skyline
- Page 1 HMD Skyline Back Cover Replacement Internal...
- Page 2 INTRODUCTION Follow this guide to replace a cracked or damaged back cover on your HMD Skyline smartphone. The back cover includes the wireless charging coil. If your phone's wireless charging is intermittent or not charging at all, you may need to replace the back cover.
- Page 3 Step 2 — Separate the back cover A screw‑driven camshaft in the bottom left corner pushes the back cover away from the phone, creating a gap to begin separating the cover. With the back cover facing up, use a T3 Torx screwdriver to turn the screw in the bottom edge counterclockwise until the back cover pops up.
- Page 4 • Insert an opening pick under the bottom left corner of the back cover and slide it along the bottom edge to release the clips and separate the adhesive. • You should feel and hear the back cover clips release. If you don't, insert the pick deeper and try again.
- Page 5 Step 4 Continue sliding the pick under the perimeter of the back cover to fully separate the clips and adhesive. Step 5 — Remove the back cover Lift and remove the back cover. During reassembly: Now is a good time to test your phone before sealing it up. Power it on and check that it works.
- Page 6 page.) • Place the back cover onto the frame and firmly squeeze around the perimeter to reengage all the clips. Internal...
- Page 7 Snap 1 Snap 2 Internal...
Need help?
Do you have a question about the Skyline and is the answer not in the manual?
Questions and answers