Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Unox SpeedX XEPA-0523-EXRN
Summary of Contents for Unox SpeedX XEPA-0523-EXRN
- Page 2 Please see the back cover for contacts in your local area. TECHNICAL DOCUMENTATION IN DIGITAL FORMAT To download the documentation and full user manual in digital format, log in to UNOX http://infonet.unox.com | http://unox.com. After registering on the portal, you will need to enter some information about your UNOX product: ■...
- Page 3 Dear Installer and Customer This manual contains all the information you need to use, install and maintain this appliance correctly. Please read it carefully before assembling the appliance and store it safely for future reference. If you do not fully understand any of the contents, please contact the manufacturer for further information.
- Page 5 SAFETY INFORMATION FOR INSTALLING THE APPLIANCE General precautions Read this manual carefully before installing the appli- ■ ance. Store this manual carefully for future reference. Failure to comply with the safety regulations, and any ■ installation or maintenance other than those indicated in this manual voids the warranty* and relieves the man- ufacturer of all liability.
- Page 6 sonal protective equipment (PPE - gloves, safety shoes, etc.). If the appliance is installed on a mobile base or ■ stacked, only use components supplied by the manu- facturer and follow the assembly instructions provided in the packaging. The packaging material is potentially dangerous. It ■...
- Page 7 Warnings for the electrical connections Before installing the appliance, check that the systems ■ are compliant with the installation standards in the spe- cific country and with the specifications indicated on the appliance serial plate. Connections to the power mains must comply with the ■...
- Page 13 gent residue in parts of the circuit that could be pres- surised. Do not tamper with the oven water circuit in any cir- ■ cumstances because this could cause damage, injury or death. The oven water circuit begins with a 3/4” con- nector, with a non-return valve built in, and includes all the subsequent piping and accessories.
-
Page 20: The Installation Area
POSITIONING The installation area Install the appliance in areas: ■ specific for this purpose and compliant for cooking industrial foods; ■ that are adequately ventilated; ■ that comply with the laws in your country regarding system safety/ safety in the workplace; ■... - Page 26 How to connect the electrics The appliance leaves the factory with the power cable already fitted on the terminal board; the electrical connection must be made by: ■ A | fitting a power plug (not supplied) of a suitable type and load for the maximum power absorbed by the oven’s phases (data available on the attached “Technical specifications”...
-
Page 30: Plumbing Connections
PLUMBING CONNECTIONS Incoming water There are 1.5 metres of hose at the rear of the appliance for plumbing. Before connecting the water pipe to the appliance, flush out the pipe with water to eliminate any residues. A shut-off valve should be positioned between the water mains and the appliance. - Page 32 Anti-limescale filter ovens are equipped with a filter to temporarily reduce the UNOX Digital.ID hardness (calcium and magnesium carbonates) of the water used to produce steam, so as to prevent the formation of limescale inside the cooking cavity. In the event of 10 days of resin filter inactivity, please follow the instructions on the control panel.
- Page 34 You do not need to fit a syphon as there is one already inside the appliance. UNOX recommends its own pipes and hoses. The waste water draining from the oven may be hot (90°C). The pipes used for water drainage must be able to withstand high temperatures.
- Page 47 CERTIFICATION EU declaration of conformity for electrical appliances Manufacturer: UNOX S.p.A. Address: Via Majorana, 22 - 35010 Cadoneghe, Padua, Italy Declares, under its own responsibility, that the product SPEED-X...
- Page 48 complies with the Electromagnetic Compatibility Directive 2014/30/ EC and the Radio Equipment Directive (RED) 2014/53/EC through the following standards: EN 55011: 2016 + A1:2017 + A11:2020 EN 55014-2:1997 + A1:2001 + A2:2008 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 61000-3-11:2000 EN 61000-3-12:2011 EN 61000-6-2:2005 EN 61000-6-3:2007 + A1:2011 ETSI EN 301 489-1: 2019...
Need help?
Do you have a question about the SpeedX XEPA-0523-EXRN and is the answer not in the manual?
Questions and answers