Advertisement
★ The Self-timer lamp lights for 7 seconds, then
blinks for 3 seconds.
★ The light-meter will operate when the shutter
release button is pressed, so stand behind the
camera and press the shutter.
★ If the exposure mode is set to "B" (bulb), the
self-timer cannot operate.
★ To cancel self-timer operation, turn the main
switch lever to switch to another position.
★ When using the self-timer and taking pictures
with the flash, check to make sure the flash is
completely charged before pressing the shutter
button.
★ After you've finished taking pictures with the
self-timer, turn the main switch lever to return to
either the "OFF", "S", or "C" positions. If the
main switch lever is left as is, then the next
picture-taking will be done by self-timer.
18. Flash photography
We recommend using the flash when taking
pictures indoors or outside at night. Flash
photography is very effective when taking pictures
of people in the shade or when they are back
lighted.
Do not discharge the flash close up people's
eyes (especially young children). There is a
danger of injury to the eye.
Don't point a flash toward the driver of any
vehicle and then take a picture. That could
cause an accident.
Do not take flash pictures if the surface of the
flash is dirty or if it is covered by the hand or
some object. The high temperature produced
during
flash
photography
degradation of the flash or distortion of color.
Before taking pictures, clean off the flash
surfaces and make sure the flash is not
covered.
could
cause
Advertisement
