Table of Contents
Advertisement
2729_E_A_print.qxd
03.7.11
11:11 AM
FOCUS LOCK
Focus lock may also be used when a special focusing situation prevents the camera from
focusing on the subject. This function is controlled with the shutter-release button.
100
Place the subject within the monitor. Press and hold the
shutter-release button partway down to lock the focus.
• The focus signal and focus frame will appear on the monitor
Without lifting your finger from the shutter-release button,
100
recompose the subject within the image area. Press the
shutter-release button all the way down to take the
picture.
Camera Notes
Every time a still image is recorded, it is stored with an exif tag that contains the date and time of
recording as well as shooting information. This information can be viewed on a computer with the
DiMAGE Viewer software.
28
R
ECORDING MODE
Page 28
to show the image is in focus.
SPECIAL FOCUSING SITUATIONS
The camera may not be able to focus in certain situations. In these situations the focus-
lock function (p. 28) can be used to focus on another object at the same distance as your
main subject, and then the image can be recomposed to take the picture.
100
The subject in the
The subject is too dark.
focus frame is low in
contrast.
100
100
Two subjects at differ-
The subject is near a
ent distances overlap
very bright object or
in the focus frame.
area.
100
29
Advertisement
Table of Contents
