Page 1
Not included: An iOS (iPad or iPhone) or Android device is required to interface with and control your Aurender. The Aurender must be connected to a Local Area Network (LAN) via Ethernet (CAT5 or higher) in order to facilitate communication between your remote device and the Aurender.
With the AC switch on the rear in the ON position, simply press and release the front panel On/Off button to turn the Aurender on or off. The surrounding LED light will pulse while the unit is starting up or shutting down, and it will stop pulsing when fully turned on or off.
Page 3
1. User-installable SSD/HDD Slots The A200 is supplied 2 bays for user-installable storage. The unit does not include built-in storage. If it is your intent to import and store digital audio files on the N20, you will need to install the appropriate hard drive(s)/SSD(s) first. Please refer to the “...
"off" position. More information on proper shut down procedure is found here: What is the proper way to shut down my Aurender? Because A200 has UPS circuitry inside, it will take some time for the unit to be drained of power after the power switch turned off.
Page 5
MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner. The A200’s front panel also uses text indicators to display MQA playback and the respective sampling rate of the file or stream being played. ‘MQA’ or ‘MQA Studio’...
Page 6
• Unplug power cord during severe lightning storms (after shutting down properly). • Please note that hard drives can break down. Do not consider your Aurender the "Master" copy of your precious music library! Rather, maintain a separate master copy and consider your Aurender as a secondary backup copy.
Need help?
Do you have a question about the A200 and is the answer not in the manual?
Questions and answers