Shark STEAM & SCRUB S7201QGN Owner's Manual

814100117
STEAM MOP ASSEMBLY
Insert the mop handle into the steam mop
body until it clicks into place.
2 To attach the Dirt Grip Soft Scrub Pads,
place
plastic rings facing up. Align the indent
on the rotating discs on the bottom of
the mop head with the plastic rings on
the pads, then gently lower the mop head
onto the pads, pressing until the pads are
secured.
3 Unplug the steam mop before refilling the
water tank. To open the water tank, pull the
lid down.
4
Use a filling flask to pour distilled water
into the tank
exceed the Max Fill line. When finished,
close the tank lid firmly. Add
to the tank. Chemicals or cleaning solutions
(vinegar) may damage the steam mop and
could be unsafe for you and your family.
• Accessories may vary depending
The image shown here is for illustrative purposes only and may
be subject to change. be subject to change.
ASSEMBLING YOUR STEAM & SCRUB
fig. 1
(fig. 1)
BOTH
pads flat on the floor with the
(fig. 2)
(fig. 3).
(fig. 4).
Make sure not to
ONLY water
on the model.
fig. 2
fig. 3
Filling fl ask
not included. not included.
fig. 4