DEMAG DC-II Operating And Maintenance Instructions Manual page 73

5 COMMISSIONING
5 Commissioning
5.1 Safety during commissioning
SPECIALIST SKILLS REQUIRED
Incompetent commissioning can be unsafe, or cause unsafe and unreliable operation of
the product that can cause death, serious injury, or property damage.
Only personnel who are authorized and properly trained may commission the product.
Local regulations and the instructions and warnings that are provided in product
documentation must be obeyed.
MACHINE MALFUNCTION HAZARD
Using a defective machine can cause death, serious injury, or property damage.
If you notice any abnormalities or defects during commissioning, investigate and repair
the products according to instructions. Defective products may not be taken into use.
NOTE Local regulation may demand other commissioning tests to be performed before the
products can be taken into use. Make sure that all local requirements are fulfilled in
commissioning.
•
Obey local safety regulations.
•
Make sure that you have all the appropriate personal protective equipment. Use them when
required.
•
Follow the fall protection procedures.
•
Prevent access to the area from unauthorized persons and bystanders.
•
Ensure that the secured area is spacious enough to prevent injuries that could occur if
components or tools fall.
•
Follow lockout-tagout-tryout procedure.
•
Inform personnel who work in close the area about the commissioning and tests.
•
Use hand lines that are securely attached to the building structure to lift and lower materials
and tools. When you work in high places, use safety equipment to make sure that objects do
not fall.
•
Make sure that personnel or body parts cannot be struck, crushed, or compressed by the
product when it moves:
•
To prevent entrapment, use guards to shield parts that move.
•
Be prepared in case the equipment moves in the wrong direction during tests.
•
Verify that installation of mechanical and electrical equipment is completed according to the
SAT (site acceptance test) check list.
5.1.1 Responsibilities of commissioning personnel
•
Personnel must know how to use basic controls correctly and safely for the purpose of
functional tests.
•
If you use a manlift, familiarize yourself with its operating and safety instructions.
OPERATING AND MAINTENANCE INSTRUCTIONS
WARNING
WARNING
73