Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BETTE BetteSpa
Summary of Contents for BETTE BetteSpa
- Page 1 EN Whirl systems EN Operating instructions...
-
Page 3: Table Of Contents
4.2.4 Cleaning of the drain, Ø52 2.1 Technical data 4.2.5 Cleaning of the drain, Ø90 2.2 Function description 4.2.6 Cleaning of the spring inlet, Ø90 2.2.1 BetteSpa whirlpool system 2.2.2 BetteJet whirlpool system 2.2.3 BetteAirjet Plus whirlpool system 2.2.4 Disinfection 2.2.5 LED colour spotlight 3 Operation 3.1 Operating the units... -
Page 4: Notes
– The manufacturer‘s instructions for use must be observed – Bette GmbH & Co KG reserves the right to make changes to when using such products manually. the product and the operating instructions without informing – Disinfection is only possible when the bathtub is filled with third parties. -
Page 5: Description
floor nozzle disinfection control button 2.2.4 Disinfection 2.2.1 BetteSpa whirlpool system The automatic disinfection system adds a measured amount of disinfectant to the water to disinfect the nozzles and pipes. 2.2.5 LED colour spotlight The spa whirlpool system is an air jet system with electronically controlled dosing and interval switching. -
Page 6: Operation
Operation 3.1.4 Control button The whirl system is controlled by the control button. The The following section describes how to operate the buttons on it are labelled with the corresponding symbols individual units and systems. for the nozzles, LED colour spotlights and disinfection. water nozzles Operating the units Achtung... -
Page 7: Operating The Disinfection
3.3 Operating the disinfection 3.3.3 The disinfection process Achtung Achtung ATTENTION! CAUTION! Soiling of the whirlpool bathtub! Damage to health! Excessive foaming during the disinfection Incorrect use of the disinfectants. process is possible if soap residue remains in → Observe the manufacturer‘s instructions and the bathtub. -
Page 8: Operating The Colour Searchlights
3.4.1 Switch on colour spotlights BetteSpa post-drying The colour searchlights are switched on using the control button on the The final drying function is automatically started after each searchlight. This automatically activates use of the tub. -
Page 9: Cleaning The Neck And Foot Nozzles
4.2.4 Cleaning of the drain, Ø52 NOTE We recommend using a toothbrush for cleaning The components of the drain can be dismantled and to remove dirt from small crevices. individually cleaned. This process should be carried out monthly. If a small/large amount of dirt is detected, the The cover, the ball and the sealing ring can be cleaned with cleaning interval can be extended/shortened at your own water and a light soap solution. -
Page 10: Cleaning Of The Spring Inlet, Ø90
4.2.6 Cleaning of the spring inlet, Ø90 The drain cover can be removed and cleaned individually. This process should be carried out monthly. If a small/ large amount of dirt is detected, the cleaning interval can be extended/shortened at your own discretion. To clean the drain, remove the drain cover by turning it anticlockwise. - Page 12 Bette GmbH & Co. KG Heinrich-Bette-Straße 1 33129 Delbrück Germany T +49 5250 511–0 info@bette.de www.my-bette.com...
Need help?
Do you have a question about the BetteSpa and is the answer not in the manual?
Questions and answers