Advertisement
Installation Windows
x.
Click "FINISH" to complete Dial Up
Networking Install.
y.
Go back to Step 1.
4.
Continue through Setup until "Modem Properties"
menu appears.
5.
If your phone is not on the list shown, click "ADD".
If your phone is already on the list, click "CLOSE" and
skip to Step 17.
6.
From "Install New Modem" menu, select "Don't detect
my modem, I will select it from a list" and click "NEXT".
7.
Browse to and select the phone you are installing as a modem
and click "NEXT".
8.
When prompted click "Finish".
9.
When brought back to "Modem Properties" menu,
click "CLOSE".
10. When prompted to "ADD RAS DEVICE", click "YES".
11. Once at "RAS SETUP" menu, click "ADD" and select your
modem from the drop down menu.
12. Click "OK".
13. From "RAS SETUP" menu, click "CONFIGURE".
14. When prompted to "Configure Port Usage", select "Dial Out
Only" and click "OK".
15. When brought back to "RAS SETUP" menu,
click "CONTINUE".
16. When prompted to Restart, DO NOT RESTART!
17. When brought back to Install, select "Finish Install and
Restart Computer".
18
NT
®
Advertisement
