Table of Contents
Related Manuals for Miele DA 1255
Summary of Contents for Miele DA 1255
- Page 1 Operating and installation instructions Rangehood To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr. 12 407 040...
-
Page 2: Table Of Contents
Contents Warning and Safety instructions ................Caring for the environment ..................11 Guide to the appliance....................12 Description of the functions ..................14 Operation ........................15 Switching the fan on/off ....................15 Switching the fan off ...................... 15 Switching the cooktop lighting on/off ................. 15 Energy saving tips ...................... - Page 3 Contents Connection for air extraction ..................37 Non-return flap......................37 Condensed water ..................... 38 Silencer ........................38 Technical data ........................ 39...
-
Page 4: Warning And Safety Instructions
It must only be used to extract vapours and remove odours from cooking. Any other usage is at the owner's risk. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. The rangehood cannot be used to ventilate the room in which it is ... -
Page 5: Safety With Children
Installation must be performed by a suitably qualified and competent person. Maintenance and repairs must only be carried out by a Miele authorised technician. A damaged appliance can be dangerous. Check it for visible signs ... - Page 6 The protective measures provided in the installation and in this Miele product must also be assured in their function and operation in isolated operation or in non-mains synchronous operation, or replaced with equivalent measures in the installation.
- Page 7 Warning and Safety instructions Using at the same time as other heating appliances that depend on the air from the room Danger of toxic fumes! Great care should be taken when using the rangehood in the same room or the same area of the house as another heating appliance that depends on the air from the room.
-
Page 8: Correct Use
Warning and Safety instructions In order to ensure safe operation and to prevent gases given off by a heating appliance from being drawn back into the room, when the rangehood and the heater are both operated simultaneously, an underpressure in the room of 0.04 mbar (4 Pa) is the maximum permissible. -
Page 9: Correct Installation
Warning and Safety instructions Overheated oil and fat can ignite, causing fire damage to the rangehood. When cooking with oil or fat, chip pans and deep fat fryers etc., do not leave the pans unattended. Similarly, never leave an open grill unattended when grilling. - Page 10 Accessories and spare parts Use only genuine original Miele spare parts. If spare parts or accessories from other manufacturers are used, the warranty will be invalidated, and Miele cannot accept liability.
-
Page 11: Caring For The Environment
Please retain and dispose of Please dispose of it at your local EPS packaging responsibly. For further community waste collection / recycling information, please contact Miele. centre for electrical and electronic appliances. You are also responsible for deleting any personal data that may be stored on the appliance prior to disposal. -
Page 12: Guide To The Appliance
Guide to the appliance... - Page 13 Guide to the appliance a Control panel b Cooktop lighting c Charcoal filter Optional accessory for recirculation mode d Cover for the charcoal filter compartment e Grease filter f Exhaust connection ( 150 mm, or 125 mm with reducing collar). g Exhaust outlet h Recirculation grilles i Sliding switch for the cooktop lighting j Sliding switch for the fan...
-
Page 14: Description Of The Functions
Description of the functions Depending on the model of the rangehood, the following options are available: Air extraction mode The air is drawn in and cleaned by the grease filters and directed outside. Recirculation mode (available as an optional extra with a conversion kit and charcoal filter: see “Technical Data”) The air is drawn in and cleaned first by... -
Page 15: Operation
Operation Switching the fan on/off Switching the cooktop lighting on/off Switch the fan on as soon as you start cooking. This is to ensure that vapours The cooktop lighting can be switched on are captured right from the start. and off independently of the fan. Select power levels 1 to 3 for light to ... -
Page 16: Energy Saving Tips
Energy saving tips This rangehood operates very efficiently and economically. The following will help you to save even more energy when using it: - Ensure that there is sufficient ventilation in the kitchen when cooking. In extraction mode, if there is insufficient air flow the rangehood cannot operate efficiently and this causes increased operating noise... -
Page 17: Cleaning And Care
Unsuitable cleaning agents can becoming dirty again, we recommend damage the surfaces and control treating them with a stainless steel care elements. product (available from Miele). Do not use any cleaning agents Important for appliances with containing soda, acid, chloride, or lacquered casing solvent. -
Page 18: Grease Filters
Cleaning and care Important information for the control Grease filter cleaning intervals elements Accumulated grease solidifies over a longer period of time and makes If soiling is not removed promptly, it cleaning more difficult. The grease filters could cause the control elements to should therefore be cleaned every 3 to alter or discolor. -
Page 19: Change Grease Filters
If you notice any damage, replace the Ensure the spray arm is not grease filters. obstructed. You can obtain grease filters from Miele Use a standard household cleaning customer service (see end of these detergent. operating instructions) or from your Miele specialist dealer. -
Page 20: Nosmell Active Charcoal Filter
The charcoal filter is fitted in the canopy above the grease filters. Charcoal filters are available to order via the Miele online shop (see the end of this booklet for contact details) or directly from Miele. The part number of the charcoal filter required is listed under "Technical data". -
Page 21: Changing A Lamp
Lamp type........GU10 Specification ........12981 Wattage ..........3 W ILCOS D Code..DR-3-H-GU10-50/56 These lamps are available from Miele. Loosen the lamp's securing screw a little. Switch off the fan and the lighting. Slide the screw and the lamp ... -
Page 22: Service
Contact in case of fault In the event of any faults which you cannot remedy yourself, please contact Miele. You can book a Miele customer service call-out online at www.miele.com.au/ service or www.miele.co.nz/service. Contact information for Miele can be found at the end of this booklet. -
Page 23: Installation
*INSTALLATION* Installation Before installation Before installation, it is important to read the information given on the following pages as well as the “Warning and Safety instructions” at the beginning of this booklet. -
Page 24: Assembly Parts
*INSTALLATION* Installation Assembly parts... - Page 25 *INSTALLATION* Installation a 1 exhaust connection for 150 mm or 125 mm exhaust ducting (not to be used with 4 screws, 5 x 60 mm and recirculation mode). 4 plugs, 8 x 50 mm b 1 non-return flap for securing the wall bracket. for fitting into the exhaust socket (not to be used with recirculation ...
-
Page 26: Appliance Dimensions
150 mm, a spacer trim can be used to cover the building-in space left by the previous rangehood. The spacer trim can be ordered as an accessory in various widths: – Miele DAB 55 for DA 1255 – Miele DAB 60 for DA 1260 – Miele DAB 100 for DA 1200... -
Page 27: Safety Distance (S)
*INSTALLATION* Installation Safety distance (S) The minimum distances between the cooking surface of a cooktop (pan support(s) for gas models) and the bottom of the rangehood are as follows, unless a greater distance is specified by the manufacturer of your cooking appliance. -
Page 28: Installation Recommendations
*INSTALLATION* Installation Installation recommendations Protective foil - To achieve optimum vapour The housing components of stainless extraction, the rangehood must be steel models have protective foil around positioned centrally over the cooktop, them to protect them from transport not to the side. damage. - Page 29 *INSTALLATION* Installation Check the position of the deflector. For operation in recirculation mode, cover the opening at the back of the rangehood with the sticker supplied with the NoSmell active charcoal filter (optional accessory). Extraction Recirculation Remove the deflector if necessary and turn it as appropriate for the operating mode required.
-
Page 30: Installation Under A Wall Unit
*INSTALLATION* Installation Securing from above Installation under a wall unit Use only the fixing points as shown on the drilling template and the screws supplied. Incorrect fitting can lead to damage to the rangehood and could compromise electrical safety (e.g. electric shock). - Page 31 *INSTALLATION* Installation Securing from below Miele recommends securing from above as described above. Should it not be possible to do so, the rangehood can also be secured from below to the base of the unit. The screws supplied are intended for...
-
Page 32: Wall Installation
*INSTALLATION* Installation Wall installation You also have the option of fitting the rangehood to the wall using two mounting brackets. Remove the guide plugs from the housing. Cut the drilling template to size and position against the wall. The top edge of the template indicates the top edge of the rangehood. - Page 33 *INSTALLATION* Installation Fix the mounting brackets to the wall using the plugs and screws supplied. The screws and plugs are designed for use in solid walls only. For other types of wall construction, alternative fixings will be required. ...
-
Page 34: For Air Extraction Mode
*INSTALLATION* Installation For air extraction mode Hang the rangehood on the brackets. For 150 mm exhaust ducting, cut the exhaust socket to size with a sharp knife. For 125 mm exhaust ducting, the exhaust socket is installed as it is. ... -
Page 35: For Recirculation Mode
*INSTALLATION* Installation Mains connection Refer to the notes in “Electrical connection” and “Warning and Safety instructions” before connecting to the electricity supply. Plug the connection cable into an electrical socket. Functional check To do this, switch the fan on. - In air extraction mode air should not come out of the air outlet at the front of the rangehood. -
Page 36: Electrical Connection
The protective measures installation side for each pole. provided in the domestic installation and in this Miele product must also be Risk of fire from overheating. assured in their function and operation Connecting the rangehood to multi-... -
Page 37: Connection For Air Extraction
If the exhaust air is ducted through an ducting. outside wall, a Miele wall vent or a Miele roof vent (available as an optional - The exhaust ducting must be as short accessory) is recommended. These are and straight as possible. -
Page 38: Condensed Water
*INSTALLATION* Installation Condensed water Miele will not accept warranty claims for any functional defects or damage If the exhaust ducting is to run through caused by inadequate ducting. rooms, ceiling space etc., condensate may form in the ducting due to... -
Page 39: Technical Data
Cooktop lighting 2 x 3 W Total rated load 236 W Voltage, frequency AC 230 V, 50 Hz Fuse rating 10 A Mains connection cable length 1.5 m Weight DA 1255 11 kg DA 1260 11.2 kg DA 1200 14.6 kg Optional accessory for recirculation mode 1 charcoal filter DKF 18-P... - Page 43 Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 1300 464 353 (1300 4 MIELE) info@miele.com.au www.miele.com.au Miele New Zealand Limited IRD 98 463 631 8 College Hill...
- Page 44 DA 1255, DA 1260, DA 1200 en-AU, NZ M.-Nr. 12 407 040 / 01...
Need help?
Do you have a question about the DA 1255 and is the answer not in the manual?
Questions and answers