Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support Pipe Inspection System Model:WP9608F We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Please read this manual carefully before use! Attentions 1. Please read the manual carefully before using it. 2. Handle it carefully during operation, avoid throwing down or pressing it heavily. 3. If the users disassemble or deliberately damage the machine, it will beyond the warranty.
Page 4
Instruction for Product Camera Product Specification Item: parameter Camera diameter: 23mm With the tube diameter: >25mm 12 LED with high while Camera light source: light(adjustable) Camera working voltage: Lights working voltage: self-balancing Camera assist function: Water proof: IP68 Camera material: stainless steel Camera size: 23mm...
Coil Cell box 1. Monitor video Power of monitor 3. Adjacent coil plug 4. AV output 5. Battery indicator 6. Power input for charger 7. Light-degree adjustment for white light LED 8. Power switch 9. Power light System Installation 1. Vital: turn off the power switch, connect the video camera and the monitor, or the video camera and the monitor may be damaged.
Page 6
2. Connect camera -coil -cell box -monitor (Pic) 3. Turn on the power switch in the power box, the indicator light on the monitor is on, the switchboard starts. 4. 4 Install the video camera with the protective cover slightly and put it into the pipe, rotate coil to proper depth.
Page 8
Pipe Failure Analysis 1. Ensure that each interface is properly connected during installation. 2. During the installation process, when a blue screen appears, it means that the camera, battery box and display screen are not connected successfully ① Check whether the camera is loose, and tighten the camera. ②...
Page 9
damage the camera LED. 1. Check if battery is fully charged. 2. Check if display screen is damaged. No Power 3. check the power box and screen connecting, to be sure it is right. 1. The memory card is damaged. Replace the memory Cannot format card.
FCC Information CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment! This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This product may cause harmful interference.
Disposal information: This product is subject to the provision of European Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol.
Page 12
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the WP9608F and is the answer not in the manual?
Questions and answers