Battery Weed Brush moving parts. Damaged or entangled cords increase the risk of electric shock. 18V EasiWeeder e) When operating a machine outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of elec- tric shock.
If the connecting cable needs replacing, this must be carried out by FLYMO 1.2.2. Safety instructions for weed brushes or by an authorised after sales service centre for FLYMO machines in order to avoid safety hazards.
Note: The charge cycle can be carried out only if the temper- The FLYMO spare parts are available from your FLYMO dealer or from ature of the battery is within the permissible charging temper- ature range, see 7. TECHNICAL DATA.
3.5. Adjusting the length of the shaft [Fig. O6] 3.7. Adjusting the weed brush rotation speed [Fig. O7] You can variably adjust the rotation speed of the weed brush from DANGER! min. 700 to max. 1800 RPM . Risk of injury Turn the power regulator to the desired position.
Art. 5313826-01 Note: P4A PBA 18V/72 Art. 5313827-01 Repairs may only be carried out by the FLYMO customer service or by specialist dealers approved by FLYMO. Please contact the FLYMO customer service in the event of other faults (see reverse).
Page 9
Li-ion https://www.flymo.com/uk/content/contact-us IMPORTANT! 1. Discharge the lithium-ion cells fully (contact FLYMO customer service about this). 2. Ensure that the lithium-ion cell contacts do not short-circuit by placing tape over them. 3. Dispose of the lithium-ion cells properly at or through your local...
Need help?
Do you have a question about the 18V EasiWeeder and is the answer not in the manual?
Questions and answers