Advertisement
Quick Links
User Guide – Rugged Robot
Getting started with Rugged Robot
First things first – Charging Rugged Robot
Before using your Rugged Robot, ensure that it has enough charge. Here is a charging checklist:
• Turn off the power to charge, the robot will not work whilst charging.
• To charge, use the USB cable provided by inserting the DC jack into the charging socket.
• Takes approximately 1-2 hours to charge and once fully charged will run for around 3
hours.
• Top tip – If you are using the Rugged Robot App, ensure your tablet is charged and ready
to go, along with any other accessories you may be using.
How to switch Rugged Robot on?
Press the power button which is located on the left-hand side of the control panel. The robot will
indicate it is switched on by lighting up (eyes etc) and beeping.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TTS Rugged Robot
Summary of Contents for TTS Rugged Robot
- Page 1 • Takes approximately 1-2 hours to charge and once fully charged will run for around 3 hours. • Top tip – If you are using the Rugged Robot App, ensure your tablet is charged and ready to go, along with any other accessories you may be using.
- Page 2 How do I know when Rugged Robot is fully charged? When first turned on, the six segments around the LED ring on top of Rugged Robot will light up red to indicate that the robot is fully charged. As it loses charge, the segments will start to disappear.
- Page 3 Pairing more than one Rugged Robot for a lesson If using more than one Rugged Robot in a lesson, a top tip is to pair them one by one, with distance between them if possible, and maybe add a stickered label with a colour, number or name so each device is identifiable.
- Page 4 However, the storage area can also be used to transport small items collected by the children when the data logger is not being used. • Compatible with the TTS TacTile Reader (physical coding) – purchased separately. • Free downloadable App (Android and iOS) – Not compatible with mobile phones.
- Page 5 Programming Rugged Robot Rugged Robot has been designed as an outdoor floor robot. • After initial switch-on, the eyes will light orange and the rear lights will light red, these will remain on until the Robot is turned off. • If the Robot is not used for 5 minutes, it will enter low power mode and turn off all lights.
-
Page 6: Troubleshooting Tips
Ensure the obstacle is high enough to trigger the sensor - small objects may not be seen by the sensor. Once you have mastered Rugged Robot – Press the green ‘GO’ button and let the fun begin!
Need help?
Do you have a question about the Rugged Robot and is the answer not in the manual?
Questions and answers