Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Aqara Manuals
  4. Relays
  5. DCM-K01
  6. User manual

Aqara DCM-K01 User Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Product Introduction
The Dual Relay Module is a device with an almost unlimited number of use cases. From switches,
plugs, to curtains, garage doors and even boilers - everything will be possible with this tiny
module. AC, DC, Dry Contact mode, Interlock and DIN Rail mount make it a truly versatile
solution that can also be connected to most popular third-party ecosystems.
* An Aqara Zigbee 3.0 hub is required. Some functions require specific models of the Aqara hub.
Please visit www.aqara.com/support for more details.
** Do not press the button forcefully with tools, as it may cause damage to the button.
Preparation Before Use
1. A smartphone or tablet that supports Wi-Fi or a cellular network (with iOS or Android system)
is required.
2. Please ensure that there is a Wi-Fi connection and your internet connection is stable.
3. An Aqara Zigbee 3.0 hub is required (The distance between this product and your hub should
be within 10 m).

Advertisement

loading
Need help?

Need help?

Do you have a question about the DCM-K01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aqara DCM-K01

Summary of Contents for Aqara DCM-K01

  • Page 1 AC, DC, Dry Contact mode, Interlock and DIN Rail mount make it a truly versatile solution that can also be connected to most popular third-party ecosystems. * An Aqara Zigbee 3.0 hub is required. Some functions require specific models of the Aqara hub. Please visit www.aqara.com/support for more details.

  • Page 2: Device Installation

    Live wire to the terminal L, the neutral wire to the terminal N. 3. Please open the Aqara Home app, tap “Home” and then tap “+” in the top right corner to enter the “Add Device (Accessory)” page, select “Dual Relay Module T2”, and add it according to instructions in the Aqara Home app.
  • Page 3 2. Use Case A. Smart Outlet in this case, the load is connected directly to the relay. The relay acts as a simple on/off switch. B. Electric Floor Heating: similar to 1-A, but now the relay acts as a thermostat. Configuring the automations with a temperature sensor is suggested.
  • Page 4 B. Smart Roller Shade Switch: The relay can be installed behind the existing Roller Shade Switch and control the existing non-smart roller shade motor. * Please note: to use the T2 as a Roller Shade Switch, the Interlock mode should be strictly enabled.
  • Page 5 Note: The mechanical switch can be used normally under AC, if DC need to ensure that the voltage is more than 85V. 2. Use Cases (1) Garage Door Controllers: in this case, the relay is controlling the existing garage door motor using the wall button contacts (COM+OP/CS/O/S/C) To ensure the compatibility with your garage door opener, please find the wall button contacts, short them with pliers or a paper clip.
  • Page 6 Wireless Switch Mode The relay can also be used as a wireless switch that does not require replacing the batteries. (1) Connect an existing wired 1- or 2-channel wall switch and use it as a wireless switch (2) Alternatively, you can connect one or two binary sensors instead, and use the relay in automations.

  • Page 7: Product Specifications

    Red Light, Flashing Slowly Zigbee Network not Connected Product Specifications Model: DCM-K01 Wireless Protocols: Zigbee Dimensions: 45.5 × 48 × 24 mm (1.79 × 1.89 × 0.94 in.) Rated Parameters: 100 - 250 V~, 50/60Hz, μ/Max. 10A, Max 2500W ;...