Related Manuals for ElectrIQ eiQTDHPFS12
Summary of Contents for ElectrIQ eiQTDHPFS12
- Page 1 USER MANUAL 12KG HEAT PUMP DRYER eiQTDHPFS12 Thank you for choosing electriQ Please read this user manual before using this heat pump dryer and keep it safe for future reference...
-
Page 3: Table Of Contents
CONTENTS SAFETY PRODUCT OVERVIEW INSTALLATION LABEL INFORMATION OPERATION BEFORE DRYING AFTER DRYING EMPTYING THE WATER CONTAINER CLEANING THE FILTER CLEANING THE HEAT EXCHANGER TROUBLESHOOTING PRODUCT FICHE ERROR CODES SUPPORT... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS • Keep these instructions for use with the appliance. If the appliance should be sold or passed on to others, make sure that the instructions are passed on with it. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for... - Page 5 • The mains cable and plug assembly must only be replaced with a genuine part by the manufacturer or his service agents in order to avoid a hazard. • It is important to clean fluff from the window of the dryer and around the door seal after each drying cycle.
-
Page 6: Product Overview
• DO NOT dry unwashed items in the dryer. • DO NOT attempt to dry dripping wet articles. • The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. -
Page 7: Installation
INSTALLATION • The dryer must be installed in a clean dry place. Air must be able to circulate freely around the appliance. • Do not obstruct the front air inlet or the air inlet grilles at the back of the machine. •... -
Page 8: Load Capacity
LEVELLING THE FEET Once the appliance has been positioned, the feet must be adjusted to ensure it is level. • Twist the feet clockwise to raise the appliance. • Twist the feet anti-clockwise to lower the appliance LOAD CAPACITY It is not recommended to load the dryer with more laundry than the amount shown in the table below. -
Page 9: Label Information
LABEL INFORMATION Please check the labels of the clothing items you intend to dry before drying them to prevent damage. The below table explains the different meanings of the symbols found on clothing labels... -
Page 10: Operation
OPERATION WATER TRAY FUNCTIONS PROGRAM DIAL DISPLAY Collects the water from the drying Use the dial to Access the dryer’s Displays cycle. Please see page 15 for more extra functions. choose the program information. The drawer is not needed Please see page 11. program or turn information. - Page 11 FUNCTIONS After choosing the program with the dial, press start to start the Start/pause program. During operation, press the button again to pause the program. The program can’t be changed when paused. Press the anti-crease button to make the drum rotate intermittently, to Anti-crease prevent the creasing of clothes.
-
Page 12: Program Information
PROGRAM INFORMATION NOTE: As part of the energy saving process, heat pump dryers run longer cycles than non-heat pump dryers. Approximate Washing amount of Duration Programme Load (kg) machine spin remaining (minutes) speed humidity Cotton Extra Dry 1000 Cotton Cupboard 1000 Cotton Iron Dry 1000... - Page 13 OPTIONS PROGRAMMES Delay Buzzer Time Drying Start Cancel Child Lock Delicate Drying Level Anti-crease Cotton Extra Dry Cotton Cupboard Dry Cotton Iron Dry Synthetics Cupboard Synthetics Iron Dry Delicate (default) Time drying Baby Care Duvet Sport Wool Refresh Refresh Express 34' Shirts 20' Not selectable Selectable...
-
Page 14: Before Drying
BEFORE DRYING Leave the dryer to stand for 2 hours before first use. Use a soft fabric cloth to clean inside the drum. • Before drying, thoroughly spin the laundry in the washing machine. • Sort the laundry according to fabric type and drying programme. •... -
Page 15: Emptying The Water Container
EMPTYING THE WATER CONTAINTER Empty the water container after each use, when the container is full, the programme will be paused and the FULL indicator will be illuminated. After emptying the container, press the start/pause button to resume the drying cycle. -
Page 16: Cleaning The Heat Exchanger
CLEANING THE FILTER BASE 1. Open the cover. 2. Twist both locking levers towards each other. 3. Remove the filter base. 4. Clean the filter base completely. 5. Reinsert the filter base and ensure that the two locking levers are in place. 6. -
Page 17: Troubleshooting
TROUBLESHOOTING PROBLEM SOLUTION Check the power supply. Confirm the start/pause button has been Dryer doesn’t start pressed. Confirm the door is closed. Dryer doesn’t start and displays Is the program setting correct? “END” Confirm the dryer is not empty. Check the program setting is correct. Is the dryer to full? Excessive drying time Clean the filter. -
Page 18: Product Fiche
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 392/20 12 Supplier name or trademark electriQ Model name eiQTDHPFS12 Rated capacity (kg) Type of Tumble Dryer Heat Pump Energy efficiency class Annual Energy Consumption (kWh) Automatic of Non-automatic Automatic Energy Consumption of the standard cotton programme at full load (kWh) -
Page 19: Error Codes
Contact the supplier Contact the supplier Contact the supplier There may be voltage fluctuation in mains. Wait until voltage is appropriate for working range. electriQ UK SUPPORT www.electriQ.co.uk/support Call: 0330 390 3061 Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk...
Need help?
Do you have a question about the eiQTDHPFS12 and is the answer not in the manual?
Questions and answers