Table of Contents
Advertisement
Quick Links
ORDER NO. AD9512269C8
nual
Compact Disc Changer
Service Ma
CD Changer
ant
MASH'
SL-CAT1
O
Colour
Area
Suffix for
Europe, Asia, Latin
(E)
America, Middle East,
(K)
Africa and Oceania.
System: SC-CA10
*ISB-CA10
*?SB-PC10
*1§B-CA10
Remote control
SL-CA10
ST-CA10
transmitter
RS-CA10
SE-CA10
Because of unique interconnecting cables, when a component
requires service, send or bring in the entire system.
RAE0150Z MECHANISM SERIES
I SPECIFICATIONS
Audio
Notes:
DA converter
1 bit 2 DAC MASH®
1. Weight and dimensions shown are approximate.
2. Design and specifications are subject to change without notice.
Wi General
Dimensions (WxHxD)
280X 89X 331 mm
Weight
2.5 kg
*1 SB-CA10
SC-CA10
ST-CA10
SL-CA10
SE-CA10
RS-CA10
*2 SB-PC10 (Center)
(SB-PC10+SB-PS10)
*1 Made in PAES
*2 For (E, EB, EG) Areas.....Made in PAES
For (GC, GN) Areas.....Made in NABEL
A WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It
does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians.
Any attempt to
service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
© 1995 Matsushita Electric Industrial Co., Ltd.
"Ti
} !
@
®
eC
lL | 1CS
All rights reserved.
Unauthorized copying and
:
distribution is a violation of law.
Advertisement
Table of Contents
Need help?
Do you have a question about the SL-CA10 and is the answer not in the manual?
Questions and answers
Не проигрывает диски
The Technics SL-CA10 may not be playing discs due to several possible issues:
1. Test Disc Does Not Rotate: If the disc does not rotate when the PLAY switch is turned on, the problem could be with the spindle motor or control circuit.
2. TOC (Table of Contents) Not Read: If the optical pickup does not perform TOC reading, check if it moves toward the inner track and then slightly back. If it does not move, the cause could be a failure in the sled motor or its driving circuit.
3. Lens Movement: If the lens does not make vertical movements, the optical pickup or laser diode may be faulty.
4. IC702 Failure: If there is no output or the voltage at pin 66 of IC702 is below 0.4V, IC702 may have failed.
5. Pin 6 of IC701 (RFDET): If it remains at high level (H) or the RF waveform amplitudes are not equal, it suggests a laser diode or optical pickup failure.
Each step involves checking specific components or voltages to identify the fault.
This answer is automatically generated