Targus WIRELESS COMPACT LASER MOUSE User Manual page 4

Targus Wireless Compact Laser Mouse
GB - Introduction
Thank you for your purchase of the Targus Wireless Compact Laser Mouse.
The accompanying micro USB receiver is small enough to leave plugged into
your computer or simply store it inside the mouse when travelling. This is a
plug and play device so no additional software is required.
Contents
• Targus Wireless Compact Laser Mouse
• 2 x AAA Energizer MAX Batteries
® ®
• Micro USB Receiver
• User Guide
System Requirements
Hardware
• USB port
Operating System
• Microsoft Windows 2000
®
• Microsoft Windows XP
®
• Microsoft Windows Vista
®
• Microsoft Windows 7
®
• Mac OS X 10.4 or later
®
6
Targus Wireless Compact Laser Mouse
Installing the Batteries
1. Remove the battery cover from the top of the mouse by using the notch
on the back. Carefully lift the cover up as shown in the diagram.
2. Remove the battery safety clip by squeezing the center of the clip and
sliding it back, towards the rear of the mouse. Lift up and rotate the
clip out of the way.
NOTE: THE BATTERY SAFETY CLIP WILL NEED TO BE IN THE SECURE, LOCKED POSITION
BEFORE THE BATTERY COVER CAN BE PUT BACK IN PLACE.
7