Advertisement
Quick Links
Advertisement
Related Manuals for MH LONDON MH-ST-343
Summary of Contents for MH LONDON MH-ST-343
- Page 1 10 : 00 1 or more estimated people required installation time...
- Page 2 Ok, let’s get started! Put on mood music! To prevent damage to product, use the clean side of package carton or rug as working surface. In the event of missing or damaged parts, delivery problems etc., please reach out to our team. We will be happy to fix the problem!
-
Page 3: Care Guide
care guide Clean regularly with a soft and dry cloth. To protect finish, avoid use of abrasive cleaners. Wipe up spills immediately. Please! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts. -
Page 4: Product Parts
product parts Shelf... -
Page 5: What's Included
what’s included (B) - Screw (C) - Wall Plug... - Page 6 assembly instructions Friendly Tip: Take a deep breath going in. This may be a tricky part, but nothing too overwhelming. Just follow these steps to the T and the outcome will be worth it! While assembling the product, tighten the bolts up to 50%. Once all parts are in place, only then fully tighten the bolts.
- Page 7 step 1: Place the shelf on the wall and put a spirit level on it to check alignment. Adjust if needed. step 2: Once the shelf is straight aligned to the wall, make a line running from its one end the the other using a pencil.
- Page 8 step 3: Next, measure the distance between the two keyholes using a measuring tool. step 4: Place the measuring tool against the line marked on the wall and make two marks on it where you want to mount the shelf.
- Page 9 step 5: Drill holes approx. 10 mm at the points you just marked step 6: Insert the wall plug (C) and tighten with the help of a screwdriver.
- Page 10 step 7: Now, insert the screws (B) using a screwdriver. step 8: Place the keyhole-slots over the screws.
- Page 11 Voila! Your shelf is now installed and secure!
Need help?
Do you have a question about the MH-ST-343 and is the answer not in the manual?
Questions and answers