Mirror Controls Brightness LED Volume PWR A/B Switch Hi – Low Control MIC adjustment Figure 1: Rear View Mirror MIC – Microphone for use with hands free cell phone feature. Brightness control – Adjusts the brightness level of the LCD viewing area of the mirror.
System Connections 2-out 2-out AV IN1 – Camera 1 input. (for Backup camera use) See Notes 1 and 2. AV IN 2 –Camera 2 input. See note 2. A2 Out – Audio output to second monitor for Camera 2 if camera 2 is used. (Optional) V2 Out - Video output to second monitor for Camera 2 if camera 2 is used.
Connection Notes (Continued): 2) Special camera adapter harnesses are required and available for use of this system with Voyager observation cameras. See Page 6 for more information. Wiring Diagram 2-out 2-out Intermediate Harness – Optional, can be connected between the Mirror and the Junction Box if necessary.
Page 6
Installation Notes: Do not connect Blue wire directly to 12VDC battery or Accessory. Doing so will cause the monitor to be on at all times. The “Pwr” button will not function when 12V is applied to the trigger (blue) wire. Only connect the blue trigger wire to a source that is switched on (12V) when the vehicle is put into reverse gear (such as reverse lights).