Download Print this page
Voyager WVOS541 User Manual

Voyager WVOS541 User Manual

Wvom541ap+wvcms130ap digital wireless observation system, auto-pairing featuring wisight technology

Advertisement

Quick Links

KEY FEATURES:
● Easy installation, fi ts most applications
● 5.6" monitor comes with suction cup mount and
12 Volt DC plug for easy portability
● Camera connects to rear clearance lights
®
● WiSight
technology- No cable or wiring necessary
● No interference
● Signal transmits through and around objects up to 60+ feet away
● Sharp,clear,uninterrupted picture
● Extend to 4 wireless and 1 wired cameras available
● Camera source with trigger selection available
(Optional Harness with Trigger function sold separately )
● Image mirror function available
● Image fl ip function available
Package includes a 5.6" LCD color monitor, one 12 Volt DC accessory plug,
a suction cup monitor mount, one rear color camera, stainless steel hardware,
and non-corrosive camera mounting bracket.
WVO
WVOS541
(WVOM
(WVOM541AP+WVCMS130AP)
Digital W
Digital Wireless
Observa
Observation System
WVOM541AP
English
WVCMS130AP
YOU WILL NEED:
● Voltage Meter
● Water Proof Sealant
● Drill with 1/8" drill bit
● Phillips head screwdriver
Patent # (9,054,743)

Advertisement

loading

Summary of Contents for Voyager WVOS541

  • Page 1 WVOS541 (WVOM541AP+WVCMS130AP) (WVOM Digital Wireless Digital W Observation System Observa WVOM541AP WVCMS130AP KEY FEATURES: ● Easy installation, fi ts most applications YOU WILL NEED: ● 5.6" monitor comes with suction cup mount and ● Voltage Meter 12 Volt DC plug for easy portability ●...
  • Page 2 NSTALLING THE AMERA Choose a location close to the rear clearance lights so you can easily splice the power and ground connections. Using a voltage meter, measure the clearance light wiring to deter mine positive/negative polarity. Connect the red wire from the camera to the positive wire in the rear clearance lights.
  • Page 3 NSTALLING THE ONITOR 1. Plug power cable into the back of the monitor. 2. Attach the suction cup bracket to the rear of the monitor with the supplied screw. 3. Locate fl at section of glass on your windshield (that does not block your vision) and apply suction cup.
  • Page 4 Wi-Fi hotspots, Bluetooth devices or additional wireless monitors & cameras. If you have a Voyager WiSight Digital Wireless Observation System along with any other device that transmits or receives and you are experiencing diffi culty in operating the system, the device(s) may be too close to either the WiSight Monitor or Camera.