Webb WEBC26 Original Instructions Manual
  1. Manuals
  2. Brands
  3. Webb Manuals
  4. Brush Cutter
  5. WEBC26
  6. Original instructions manual
Webb WEBC26 Original Instructions Manual

Webb WEBC26 Original Instructions Manual

26cc loop handle petrol brushcutter, 33cc cow horn handle petrol brushcutter, 43cc cow horn handle petrol brushcutter
Hide thumbs Also See for WEBC26:
Table of Contents

Advertisement

Quick Links

Download this manual
Designed to
WEBC26
26CC LOOP HANDLE PETROL
BRUSHCUTTER
Product Number: 193866003
WEBC33
33CC COW HORN HANDLE
PETROL BRUSHCUTTER
Product Number: 193871003
WEBC43
43CC COW HORN HANDLE
PETROL BRUSHCUTTER
Product Number: 193872003
en
- ORIGINAL INSTRUCTIONS
ASSEMBLY REQUIRED
MINIMUM TWO PERSONS
Service & Support: 01793 333212
Before use please read & understand this manual; paying particular attention to the safety instructions before use.
Incorrect use of the product could put the operator or machine in danger.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, our policy of continuous
improvement determines the right to make modifications without prior warning.
Images are used for illustration purposes only.
Perform

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WEBC26 and is the answer not in the manual?

Questions and answers

Related Manuals for Webb WEBC26

Summary of Contents for Webb WEBC26

  • Page 1 Designed to Perform WEBC26 26CC LOOP HANDLE PETROL BRUSHCUTTER Product Number: 193866003 WEBC33 33CC COW HORN HANDLE PETROL BRUSHCUTTER Product Number: 193871003 WEBC43 43CC COW HORN HANDLE PETROL BRUSHCUTTER Product Number: 193872003 - ORIGINAL INSTRUCTIONS ASSEMBLY REQUIRED MINIMUM TWO PERSONS Service &...
  • Page 2 INSTRUCTION MANUAL INSTRUCTION MANUAL Copyright Notice Permission is granted to reproduce this publication for personal & educational use only. Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Handy.

  • Page 3: Table Of Contents

    CONTENTS SPECIFICATIONS INTENDED USE SAFETY INSTRUCTIONS KNOW YOUR MACHINE ASSEMBLY PRE-OPERATION OPERATION MAINTENANCE, CLEANING & STORAGE TROUBLE SHOOTING PARTS DIAGRAM & LIST DECLARATION OF CONFORMITY WARRANTY ASSEMBLY IS REQUIRED • This product requires assembly before use. • See “Assembly” section for instructions. Because of the weight and/or size of the machine, it may be recommended that another adult is present •...

  • Page 4: Specifications

    INSTRUCTION MANUAL SPECIFICATIONS Model No. WEBC26 WEBC33 WEBC43 Product No. 193866003 193871003 193872003 Engine Displacement 26 cc 32.6 cc 42.7cc Idle Speed (r/min) 2800 2800 2800 Carburetor Diaphragm Diaphragm Diaphragm Fuel Tank Capacity (Litre) 0.45 0.70 0.80 Fuel Ratio (E10 Unleaded Petrol:2 Stroke...

  • Page 5: Intended Use

    IMPORTANT INFORMATION INTENDED USAGE The basic version of the handheld loop or cow horn handled petrol brush cutter, intended for private use, i.e. for use in home and gardening environments. It is designed to trim long grass, shrubs and brush, in medium to large gardens.

  • Page 6: Safety Instructions

    INSTRUCTION MANUAL SAFETY INSTRUCTIONS Read and understand the owner’s manual and labels affixed to the machine. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator is responsible for following the warnings & instructions in this manual and on the product. Read &...
  • Page 7 VIBRATION The vibration total value (tri-axial vector sum) determined according to EN 62841-1, EN 50636-2-100 WEBC26 - Vibration emission (a ) Max: Loop Handle 9.68 m/s - K= 1.5 m/s WEBC33/WEBC43 - Vibration emission (a ) Max: Cow Horn Handle 13.5 m/s...

  • Page 8: General Safety Rules

    INSTRUCTION MANUAL GENERAL SAFETY RULES Before you put the machine into operation, you must read this instruction manual. When using this machine, observe the following safety instructions to exclude the risk of personal injury or material damage. Please also observe the special safety instructions in the respective chapters. Where applicable, follow the legal directives or regulations for the prevention of accidents in relation to the use of this machine.
  • Page 9 8. To help avoid metal blade or nylon line contact or a thrown object injury, stay in operator zone behind handles and keep children, bystanders, helpers and pets at least fifteen metres from the brush cutter while it is in operation. Stop machine if anyone enters area. 9.

  • Page 10: Slope Operation

    INSTRUCTION MANUAL SLOPE OPERATION Slopes are a major factor related to slip and fall accidents, which can result in severe injury. Operation on slopes requires extra caution. If you feel uneasy on a slope, or it is greater than 15 degrees, do not trim on it. 1.

  • Page 11: Personal Safety

    General Service: 1. Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas. 2. Before cleaning, repairing, or inspecting, make certain all moving parts have stopped. Disconnect the spark plug cap and ground against the engine to prevent unintended starting. 3.

  • Page 12: Know Your Machine

    5. Harness Eyelet 15. Blade 6. Cow Horn Handle 16. Harness Assembly 7. Air Filter Cover 17. Recoil Starter 8. Fuel Tank Cap 18. Spark Plug Cap 9. Fuel Tank 10. Primer Bulb WEBC26 * Image may vary from actual machine...
  • Page 13 WEBC33/WEBC43 * Image may vary from actual machine...

  • Page 14: Set Up & Preparation For Operation

    INSTRUCTION MANUAL SET UP & PREPARATION FOR OPERATION This product must be assembled correctly before use. Carefully remove the product and any accessories from the carton. Inspect the product carefully to make sure there are no breakages or missing items during shipping. Do not discard the packing material and carton until you have carefully inspected and satisfactorily operated the product.
  • Page 15 FITTING GUARD/SHIELD 1. Install the safety cover onto the shaft with the safety cover bracket. 2. Align the four screws of the cover with the safety cover bracket. 3. Tighten the screws after setting the safety cover bracket at the appropriate position. NYLON LINE SPOOL 1.
  • Page 16 INSTRUCTION MANUAL 3. Place the Nylon Line Spool onto the threaded shaft, rotating clockwise and ensure fully tightened. 4. Remove tool from the rotating adapter. REPLACING YOUR NYLON LINE 1. Cut three metres of 2.5mm diameter Nylon Line. 2. Feed the line in through the first eyelet and out of the second eyelet. 3.
  • Page 17 Stop the engine immediately, check the blade installation and re-install correctly. An incorrectly installed blade can cause injury. LOOP HANDLE (WEBC26 ONLY) 1. Place the leg guard on the underside of the shaft, using the black collar already fitted. Ensure the leg guard is located on the left, if looking from the engine.

  • Page 18: Shoulder Harness

    INSTRUCTION MANUAL SHOULDER HARNESS 1. The shoulder harness eyelet is fitted to the shaft at the factory. 2. Push the leg of the shoulder harness clasp and then slot it through the eyelet and release to secure. 3. Adjust the Harness, ensuring it is comfortable, but tight enough to allow you to operate appropriately.

  • Page 19: Pre-Operation

    PRE-OPERATION FUEL & OIL WARNING YOUR MACHINE IS SUPPLIED WITHOUT ENGINE OIL OR E10 UNLEADED PETROL Operating an engine with insufficient oil can have catastrophic consequences. Any failure caused by insufficient oil will not be covered by the manufacturer’s warranty. Read instructions carefully.

  • Page 20: Fueling The Machine

    INSTRUCTION MANUAL To keep fuel fresh, we recommend you use SURE-START FUEL ADDITIVE (HP-199) from Handy Parts. A fuel additive added to your fuel at the time of mixture will help make your machine easier to start, extend the shelf life of your fuel mixture for up to two years, keeps the carburettor &...

  • Page 21: Stopping The Engine

    STARTING THE ENGINE - WARM Move the stop/start switch to the ‘START’ position. • • Place the choke lever to the open position (excessive cranking with choke lever closed will cause the engine to flood, making it difficult to start). Pull the recoil starter handle until the engine starts.

  • Page 22: Operation

    INSTRUCTION MANUAL OPERATION USING YOUR BRUSHCUTTER Be sure the working area is clear of stones, sticks, wire, or other objects which could damage the brush cutter. Such objects could be accidentally thrown by the spool and nylon line in any direction and cause serious personal injury to the operator and others.

  • Page 23: General Use

    The machine is designed to be operated with the machine alongside your right hip. • • Operate the trigger with your right hand & hold the D-Handle with your left hand. (WEBC26 Only) • Operate the trigger on the right handle and hold the left handle for stability (WEBC33 & WEBC43) The trigger increases and decreases the power from the engine to the attachment, increasing the •...

  • Page 24: Maintenance, Cleaning & Storage

    INSTRUCTION MANUAL WARNING DO NOT use a metal blade for scalping or edging. DO NOT trim any area where there maybe strands of fencing wire. Do not cut where you cannot see what the cutting tool is cutting. CUTTING WITH METAL BLADE •...

  • Page 25: Maintenance

    MAINTENANCE General Recommendations 1. Always observe safety rules when performing any maintenance. 2. The warranty does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain the brush cutter as instructed. 3.

  • Page 26: Storage And Transport

    INSTRUCTION MANUAL 5. If the air filter is damaged or too dirty to clean, it should be replaced with an appropriate replacement. IMPORTANT - Never clean the air filter with petrol or inflammable solvents. CLEANING Engine CAUTION Do not use a water hose or pressure washer to clean the engine. Water can damage the engine or contaminate the fuel system.

  • Page 27: Trouble Shooting

    CAUTION The engine must have completely cooled down before storing. NOTE: When storing any type of power equipment in an unventilated or material storage shed, Care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, •...
  • Page 28 INSTRUCTION MANUAL PARTS DIAGRAM – WEBC26 - ENGINE (193866003) NOTE: Parts Lists are supplied for information purposes only, not all parts are stocked individually & we recommend you contact our Spares Team parts@webbgardenpower.co.uk for expert advice. Always provide the model & product numbers.
  • Page 29 PARTS LIST – WEBC26 - ENGINE (193866003) Item No. Part No. Description Item No. Part No. Description WE03010110121 Screw M5x12 WE70070030026 Cover WE70030030853 Engine Cowling WE70030030164 Guide Screw GB/T9074.4 WE03020020055 WE03040020012 Washer GB/T97.1 4 M4x12 WE03010010062 Screw M5x20 WE02070010048 Spacer...
  • Page 30 INSTRUCTION MANUAL PARTS DIAGRAM – WEBC26 - MACHINE (193866003) NOTE: Parts Lists are supplied for information purposes only, not all parts are stocked individually & we recommend you contact our Spares Team parts@webbgardenpower.co.uk for expert advice. Always provide the model & product numbers.
  • Page 31 PARTS LIST – WEBC26 – MACHINE (193866002) Item Item Part No. Description Part No. Description WE61270030148 Gear Head Assembly WE02080020006 Rubber Cover WE03120020002 Retaining Ring 26 WE61270090005 Handle Assembly WE03120010001 Retaining Ring 10 40-41 WE03010010049 Screw M5X35 WE03090010074 Bearing 6000-2RS/P5...
  • Page 32 INSTRUCTION MANUAL PARTS DIAGRAM - WEBC33 - ENGINE (193871003) NOTE: Parts Lists are supplied for information purposes only, not all parts are stocked individually & we recommend you contact our Spares Team parts@webbgardenpower.co.uk for expert advice. Always provide the model & product numbers. 05/11/2024 v1...
  • Page 33 PARTS LIST - WEBC33 - ENGINE (193871002) Item No. Webb Part No. Webb Description Item No. Webb Part No. Webb Description WE02050070024 Recoil Assembly WE03010010077 Bolt M5x55 WE03020020012 Screw M5x20 WE02050010139 Exhaust WE02010030018 Gasket WE02070010146 Exhaust Gasket WE02050100006 Starter Pawl...
  • Page 34 INSTRUCTION MANUAL PARTS DIAGRAM - WEBC43 - ENGINE (193872002) NOTE: Parts Lists are supplied for information purposes only, not all parts are stocked individually & we recommend you contact our Spares Team parts@webbgardenpower.co.uk for expert advice. Always provide the model & product numbers. 05/11/2024 v1...
  • Page 35 PARTS LIST - WEBC43 - ENGINE (193872002) Item No Webb Part No. Webb Description Item No Webb Part No. Webb Description WE02050070024 Recoil Assembly WE03030010017 Nut 8x1.25 WE02050120002 Fuel Filter WE02050050181 Wire WE61330010018 Return Pipe WE02050030231 Ignition Coil WE70030040012 Air Filer Housing...
  • Page 36 INSTRUCTION MANUAL PARTS DIAGRAM - WEBC33 & WEBC43 - MACHINE (193871003) (193872003) NOTE: Parts Lists are supplied for information purposes only, not all parts are stocked individually & we recommend you contact our Spares Team parts@webbgardenpower.co.uk for expert advice. Always provide the model &...
  • Page 37 PARTS LIST - WEBC33 & WEBC43 - MACHINE (193871003) (193872003) Item No Webb Part No Webb Description Item No Webb Part No Webb Description WE61270030148 Gear Head Assembly WE70030160007 Clamp WE03120020002 Retaining Ring 26 WE03020020012 Screw M5x20 WE03120010001 Retaining Ring 10 WE02010010242 Pipe (26x1.5x1500)
  • Page 38 INSTRUCTION MANUAL Item No Webb Part No Webb Description WE02020160712 Bracket WE03010010060 Screw M6x20 WE02060040165 Blade WE02050220026 Easy Feed Head WE02050060020 Harness Assembly WE70080010003 Mixing Bottle WE03080030011 Double End Tubular Wrench WE03080010004 Allen Key WE03080010003 Allen Key WE70080080010 Shaft Assembly WE03010040037 Screw ST2.9x10...

  • Page 39: Declaration Of Conformity

    DECLARATION OF CONFORMITY We Handy Distribution Ltd - SN3 5HY (Importer) declare that the product: Designation: 26cc Petrol Loop Handle Brush cutter Model(s): WEBC26 Product No.: 193866003 Type/Serial No. As per rating label on machine Engine Displacement: 26cc Max. Engine Performance: 0.70kW - 7500/min Max.
  • Page 40 INSTRUCTION MANUAL DECLARATION OF CONFORMITY We Handy Distribution Ltd - SN3 5HY (Importer) declare that the product: Designation: 33cc Petrol Cow-Horn Handle Brush cutter Model(s): WEBC33 Product No.: 193871003 Type/Serial No. As per rating label on machine Engine Displacement: 32.6cc Max.
  • Page 41 DECLARATION OF CONFORMITY We Handy Distribution Ltd - SN3 5HY (Importer) declare that the product: Designation: 43cc Petrol Cow-Horn Handle Brush cutter Model(s): WEBC43 Product No.: 193872003 Type/Serial No. As per rating label on machine Engine Displacement: 42.7cc Max. Engine Performance: 1.25kW - 6500/min Max.

  • Page 42: Assembly Is Required

    INSTRUCTION MANUAL INSTRUCTION MANUAL This Service Book is provided with your Webb, to help you look after your purchase to our recommendations and enable you to take advantage of the conditional manufacturer domestic warranty*. Present this service book to your authorised Webb repair dealer, whenever a service or a warranty appraisal is required.
  • Page 43 Period of Warranty Webb (Green Products) a) 3 years from the original date of sale to the first domestic user. (2 years batteries & chargers) b) 90 days from the original date of sale to the professional/commercial user.

  • Page 44: Warranty

    It is the owner’s responsibility to ensure that their Webb machine is maintained at specifi c intervals. Any approved Webb service dealer can undertake a service, which are specialised in our products and will be aware of your particular machine and any technical updates which will save valuable time &...
  • Page 45 Your servicing Webb approved dealer will stamp & date the below relevant sections, when the correct service actions have been completed. PLEASE ENSURE THE SERVICE BOOK IS AVAILABLE FOR THE DEALER, DURING SERVICE WORK. 1st Service This must be stamped by an approved service dealer to qualify for a free second year warranty.

  • Page 46: Service Record

    Service Record INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL 48 Months 60 Months Date Date 72 Months 84 Months Date Date 96 Months 108 Months Date Date 120 Months 132 Months Date Date...
  • Page 47 Email From time to time Webb, its associated companies, authorised dealers or third parties working on our behalf may wish to contact you regarding our products, services, off ers or just opinions, which may be used for marketing, research or analysis purposes.
  • Page 48 INSTRUCTION MANUAL...
  • Page 50 Service & Support: cs@webbgardenpower.co.uk Webb, Murdock Road, Dorcan Swindon, Wiltshire SN3 5HY...

This manual is also suitable for:

Webc33Webc43193866003193871003193872003

Table of Contents

Save PDF