Behringer JT MINI Quick Start Manual page 13

24
JT MINI
Key No. Action
Envelope Trigger. Toggle between multi-trigger (LED on) or
14
retrigger (LED off).
15 Note Insert Type: Low Priority (LED on)
16 Note Insert Type: High Priority (LED on)
Note Insert Type: Nearest (both LEDs off) or Last (both LEDs
15/16 (F#)
on)
Selecting Retrigger will cause the envelope to retrigger from zero point with each
new key press; Multi-trigger will start a new envelope cycle from the point where
the old one has reached when a new key is pressed.
JT MINI Getting Started
(EN) Step 3: Getting Started
OVERVIEW
This 'getting started' guide will help
you set up your JT MINI and briefly
introduce its capabilities.
CONNECTION
To connect the JT MINI to your system,
please consult the connection guide
earlier in this document.
SOFTWARE SETUP
The JT MINI is a USB Class Compliant
MIDI device, and so no driver
installation is required. The JT MINI
does not require any additional drivers
to work with Windows and MacOS.
HARDWARE SETUP
Make all the connections in your
system. Keep the JT MINI power turned
off when making any connections.
Ensure your sound system is
turned down.
Turn on the JT MINI before turning on
any power amplifiers and turn it off
last. This will help prevent any turn
on or turn off "pops or thumps" in
your speakers.
Quick Start Guide
WARM UP TIME
We recommend leaving 15 minutes or
more time for the JT MINI to warm up
before recording or live performance.
(Longer if it has been brought in from
the cold.) This will allow the precision
analog circuits time to reach their
normal operating temperature and
tuned performance.
FIRMWARE UPDATE
Please check the behringer.com
website regularly for any updates to the
Behringer SYNTHTRIBE app.
The app looks for the latest firmware
file which can then be downloaded and
used to update the JT MINI.
25