Page 2
(if any). MClimate Jsc is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user, safety and mounting instructions in this guide.
Page 3
CAUTION! Connect the device only to a power grid and appliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the device can cause fire, property damage or electric shock. CAUTION! The device may be connected to and control only electric circuits that comply with the applicable standards and safety norms.
Installation instructions Make sure circuit breaker(s) are OFF and there is no voltage at the wires. To connect the device, we recommend using solid single-core wires or stranded wires with ferrules. The wires should have insulation with increased heat resistance, not less than PVC T105°C (221 °F) When connecting wires to the device terminals, consider the specified conductor cross-section and stripped...
Page 5
Do not connect multiple wires into a single terminal! If you are using 110-240VAC power supply: Connect the controlled circuit to the I and O terminals regarding the wiring diagram. Connect the Live to the L terminal. Connect the Neutral to the N terminal.
Once the device is supplied with power, it’ll show a LED state described in the Installation Manual, page 5. Useful information 1. If the conductors are solid-core wires: 1. First bend the cables and choose a position of the device. Then mount the wires to the terminals.
Need help?
Do you have a question about the MC-LW-16ADS-01 and is the answer not in the manual?
Questions and answers