I. INTRODUCTION The LoRa ALARM is a piece of equipment that can be used to notify users of the JRI-MySirius solution locally in the event of an alarm. It communicates wirelessly with the JRI LoRa GateWays and requires a power supply. It can trigger a visual, audible or dry contact alarm.
IV. USAGE Installation To commission the LoRa SPY ALARM, simply turn it on and make sure it is within the radio coverage area of a functional LoRa GateWay. Once turned on, you must make the declaration in MySirius. ADMINISTRATION GATEWAYS Relay/Alarm ADD, then enter the serial number of the device, a name, choose the linked GateWay and the area in which the device is installed.
Radiofrequency therefore requires periodic monitoring by recognized specialists. That's why JRI has created the maintenance contract for you. We simplify your procedures by providing you with a turnkey solution. This global service offer includes maintenance and a metrology service, which allows you to ensure the efficient operation of your devices or your installation.
The scope of this Directive excludes in its Article 2, the "Instruments of surveillance and control" which include the products manufactured by the company JRI. Nevertheless, JRI has decided to apply all the provisions of this Directive to its new electronic products that will comply with the aforementioned Directive 2002/95/EC.
Need help?
Do you have a question about the LoRa SPY ALARM and is the answer not in the manual?
Questions and answers