Selecting The Tv Stereo Or Sap - Magnavox CMWR10D6 Owner's Manual

You can select a sound channel
to output from TV. "Stereo" has
been selected as the default.
1
Press [SETUP].
2
Using [K / L], select "Required
Settings". Press [OK].
Required Settings menu will
appear.
Notes on TV channel audio
• When you record a TV program available in second audio or stereo,
you have to select either Stereo or SAP in "Required Settings"
beforehand. Refer to the following table to check an appropriate
setting.
Selected Broadcast
audio
Stereo STEREO+SAP STEREO STEREO
STEREO
MONO+SAP
MONO
SAP STEREO+SAP SAP
STEREO
MONO+SAP
MONO
• You can only play the disc in second audio if a TV program is
available in second audio and you set " TV Audio Select " to " SAP ".
20 EN
Getting started

Selecting the TV stereo or SAP

3
Using [K / L], select "TV Audio
Select". Press [OK].
Option window will appear.
TV Audio Select
Stereo
SAP
4
Using [K / L], select "Stereo" or
"SAP". Press [OK].
Stereo:
Outputs main-audio.
SAP (Secondary Audio Program):
Outputs sub-audio.
5
Press [SETUP] to exit.
Disc Audio
audio recording output
STEREO STEREO
MONO MONO
MONO MONO
SAP
STEREO STEREO
SAP SAP
MONO MONO
2
3
1
4
5