Advertisement
Quick Links
Advertisement
Related Manuals for Piktronik GD3
Summary of Contents for Piktronik GD3
- Page 1 Installation Manual Ver.0001 11/2024...
- Page 2 Dimensions of the GD3 (for mounting) The following instructions shall be taken into account at the mounting of the GD3: ▪ GD3 should be securely mounted on a flat surface where it can be clearly observed by the user. ▪ The position and orientation of the GD3 are not important, but it should be easily accessed and clearly visible for user.
-
Page 3: Gps Antenna
1.1 GPS antenna Your GPS antenna comes with the SMA connector, with a screw-type coupling mechanism. Connect it to the dedicated connector on GD3. No excessive force is required. For the best results, the antenna should get a clear view of the sky, with no obstacles in its way, to receive signals from GPS satellites. - Page 4 • GPS antenna – Connector for the active GPS antenna In Piktronik systems you only need to connect GD3 CAN connector, which must be connected to CAN network of your boat and GPS antenna for the GPS data. For faster GPS positioning, it is recommended to connect the GD3 AUX connector as well to permanent 12V power.
-
Page 5: 8-Pin Connector
GD3 Installation Manual 2.1 5-pin connector GD3 CAN, 5-pin connector cable, M12 1. SHLD; optional CAN shield, 2. CAN_V+; positive power supply, 3. GND; ground, 4. CAN_H; CAN high bus line, 5. CAN_L; CAN low bus line. 2.2 8-pin connector... - Page 6 GD3 Installation Manual Address: Piktronik d.o.o. Cesta k Tamu 17 SI-2000 Maribor Slovenia Phone: +386-2-460-2250 Internet: http://www.piktronik.com E-mail: info@piktronik.com...
Need help?
Do you have a question about the GD3 and is the answer not in the manual?
Questions and answers