Sylvania 6432GG Owner's Manual page 29

DTV
When scanning DTV
1
Select digital mode by pressing [DTV/TV].
2
Display the menu screen.
• Press [MENU].
The following menu screen is displayed.
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
3
Select "CHANNEL SET".
• Using [CH K / L ], select "CHANNEL SET".
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
• Press [VOL X ].
4
Using [CH K / L ], select "AUTO PRESET
CH(DTV)".
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
• Press [VOL X ].
Scanning and memorizing the channels auto-
matically starts.
AUTO PRESET CH(DTV)
• When the scanning and memorizing are com-
pleted, the smallest memorized channel in the
digital broadcasting will be displayed.
When scanning both TV and DTV at the same time
* You can access this menu from both modes
1
2
D28
DTV TV
(analog / digital).
Display the menu screen and select
"CHANNEL SET".
• Press [MENU] and select "CHANNEL SET"
using [CH K / L ].
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
• Press [VOL X ].
Using [CH K / L ], select "AUTO PRESET
CH(TV/DTV)".
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
• Press [VOL X ].
Scanning and memorizing the channels auto-
matically starts.
AUTO PRESET CH(TV/DTV)
• When the scanning and memorizing are com-
pleted, the smallest memorized channel in the
analog broadcasting will be displayed. If no
analog channel is memorized, the smallest
memorized channel in the digital broadcasting
will be displayed.
NOTES:
• If you press [POWER] or [MENU] while setting AUTO PRE-
SET CH, AUTO PRESET CH setting will be canceled.
• If there is no TV signal input, "NO TV SIGNALS" will appear
on the display after the completion of channel scanning.
NO TV SIGNALS
53
29
EN