Electronic Viewfinder Indications
Tape/Battery Remaining
The tape remaining and battery charge levet can be displayed during recording.
I Set the POWER
switch to CAMERA.
2 Press DISPLAY repeatedly
to select the desired display.
EVF Indications
231
Du
Fifth
First
press
press
Battery Charge
Tape
(Initial screen)
Remaining:
Remaining:
m
"à
-Baj- (No tape)
d
FULL
MM
LJ MENMMENM FULL
| EN
LJ HEN
Lal
b
HEO
EMPTY.L———X:
d
Second
press
Fourth
press
4
1X NES Ga ET EA
Third
press
* It will take several seconds for the tape
remaining indicator to operate after the
tape starts moving.
Recording the Date and Time
1 Set the POWER
Switch to CAMERA.
When placed in
Record mode, the
time and date will be
pee
DISPLAY
twice to change
the display to date
only. Press once
or twice more to
remove the date/
recorded on the
f
f
time display.
tape.
Note:
,
Only the Date and/or Time indications are recorded on the Tape.
Display-Off Mode
This feature allows you to remove all Electronic Viewfinder
Indications except Intelligent Titler (see page 29).
Before inserting a tape, press DISPLAY and STOP
together for more than one second to remove the
indications except time and date".
To Sra
the Electronic Viewfinder Indications again,
yrs 1097
turn the
Palmcorder Power off and then on again.
* To remove the time and date, press the DISPLAY button
repeatedly.
15
Need help?
Do you have a question about the Palmcorder PV-A207 and is the answer not in the manual?