Infinera XTM Series Technical Description
8ch variable optical sfp-based attenuator
Hide thumbs
Also See for XTM Series:
- Manual (24 pages) ,
- Technical description (64 pages) ,
- Technical description (21 pages)
Related Manuals for Infinera XTM Series
Summary of Contents for Infinera XTM Series
- Page 1 XTM Series 8ch Variable Optical SFP-based Attenuator Technical Description 8ch SFP-based VOA unit (VOA-8CH/SFP) Rev E | 2014-11-14...
- Page 2 © Copyright 2017 Infinera Corporation. All rights reserved. This Manual is the property of Infinera Corporation and is confidential. No part of this Manual may be reproduced for any purposes or transmitted in any form to any third party without the express written consent of Infinera.
- Page 3 Technical Assistance Customer Support for Infinera products is available, 24 hours a day, 7 days a week (24x7). For information or assistance with Infinera products, please contact the Infinera Technical Assistance Center (TAC) using any of the methods listed below: •...
-
Page 4: Table Of Contents
4.2 Verbose mode ......................9 4.3 Board settings ......................10 4.4 Network Element Parameters ................... 11 5 VOA-8CH/SFP settings in ENM GUI ...................12 6 Mechanical Layout ......................13 6.1 VOA-8CH/SFP ......................13 7 Technical Data ........................14 TD-VOA-8CH-SFP Rev E | 2014-11-14 Infinera Proprietary and Confidential... -
Page 5: Introduction
2012-12-16 Updated ENM GUI chapter to reflect R20 status 2013-02-04 Corrected figure 3 2014-05-14 Updated GUI screen dumps to reflect R23 updates 2014-11-14 Added information on cleaning of VOA-SFPs. TD-VOA-8CH-SFP Rev E | 2014-11-14 1 (14) Infinera Proprietary and Confidential... -
Page 6: Functional Description
Constant attenuation (dB) Ports Uni-directional Setting at electrical power loss Maximum attenuation Placement in card cage 1x full-sized active slot in TM-3000/II, TM-3000, TM-301/ II, TM-301 TM-102II, TM-102, TM-101 mounting TD-VOA-8CH-SFP Rev E | 2014-11-14 2 (14) Infinera Proprietary and Confidential... -
Page 7: Applications
Additionally, a Transmission Control Plane application is provided via the Dynamic Network Administrator - Metro (DNA-M) where an analysis of the power levels can be done along a link to give guidance on where power adjustments shall be made. TD-VOA-8CH-SFP Rev E | 2014-11-14 3 (14) Infinera Proprietary and Confidential... -
Page 8: Placement In Card Cage
The VOA-SFP’s are clean at delivery and no extra cleaning is required upon installation. Any cleaning shall be performed using “CleanBlast” (or similar). If cleansticks are used these should be of a diameter of 1.0 mm +/- 0.05mm to avoid damaging the VOA-SFP. TD-VOA-8CH-SFP Rev E | 2014-11-14 4 (14) Infinera Proprietary and Confidential... -
Page 9: Voa-8Ch/Ii Replacement
ENM to ease the shift to a VOA-8CH/SFP. See “Spare part & Maintenance Guide” within the O&M volume of the System Manual for further details. TD-VOA-8CH-SFP Rev E | 2014-11-14 5 (14) Infinera Proprietary and Confidential... -
Page 10: Management
ANAGEMENT Management Board data All boards/units within a XTM Series Network Element have unit related information stored in non-volatile memory banks. This information is stored at production and is required for admin- istration and start-up of the boards. The information is divided into three main groups: •... -
Page 11: Enm Gui
Some items will change color to reflect alarm status, for example the fan and power areas. When hovering over a plug-in unit, the CLI name will appear as a tool-tip. For more information on items and menu links, see section 4.1 Subracks view. TD-VOA-8CH-SFP Rev E | 2014-11-14 7 (14) Infinera Proprietary and Confidential... -
Page 12: Subracks View
All unsaved configurations will be lost if the node is rebooted. Non used interfaces on traffic units are indicated with a transparent mask. TD-VOA-8CH-SFP Rev E | 2014-11-14 8 (14) Infinera Proprietary and Confidential... -
Page 13: Verbose Mode
OK to activate Verbose mode. Some configurations can only be done with the verbose mode activated, this will vary from unit to unit. It is recommended to deactivate verbose mode when necessary configurations have been done. TD-VOA-8CH-SFP Rev E | 2014-11-14 9 (14) Infinera Proprietary and Confidential... -
Page 14: Board Settings
All related and relevant data is listed in a table format. Help Help texts for the configuration parameters. Create Opens a Create dialog for adding new configuration objects in the current view. TD-VOA-8CH-SFP Rev E | 2014-11-14 10 (14) Infinera Proprietary and Confidential... -
Page 15: Network Element Parameters
Management network menu item. The configuration parameters related to the boards is set when creating a board. TD-VOA-8CH-SFP Rev E | 2014-11-14 11 (14) Infinera Proprietary and Confidential... -
Page 16: Voa-8Ch/Sfp Settings In Enm Gui
Fig. 10 VOA-8CH/SFP GUI, “Port details” tab A per port view is shown in the sub-menu tab “Port details”. The “MultiSet” button will enable the same attenuation value to be entered on all SFP ports TD-VOA-8CH-SFP Rev E | 2014-11-14 12 (14) Infinera Proprietary and Confidential... -
Page 17: Mechanical Layout
ECHANICAL AYOUT Mechanical Layout VOA-8CH/SFP Fig. 11 Mechanical layout All optical connectors are of LC-type. TD-VOA-8CH-SFP Rev E | 2014-11-14 13 (14) Infinera Proprietary and Confidential... -
Page 18: Technical Data
10-20 dB ±0.9dB Attenuation at electrical power loss >38dB Power consumption, max Connector type Table 4 Product Revision Data Product Number Introduced Comment release VOA-8CH/SFP 19.0 1st released version. TD-VOA-8CH-SFP Rev E | 2014-11-14 14 (14) Infinera Proprietary and Confidential...
Need help?
Do you have a question about the XTM Series and is the answer not in the manual?
Questions and answers