Advertisement
Quick Links
Quick Start Guide
Get Started with Ekso EVO
Step 1: Install the Springs
1. Turn the actuator "ON"
2. Lift arm up
3. Screw spring into
4. Lower arm and turn
actuator
actuator "OFF"
Step 2: Put on Waist Belt
2. Buckle and tighten waist
1. Drape Ekso EVO over
3. Center hip pads on top of
4. Tuck in excess webbing
your shoulders
belt straps
your hip bones
Step 3: Put On Arm Cuffs
Step 4: Turn on Ekso EVO
1. Position the arm cuff in
2. Tighten the arm cuff
1. Keep your arm down at
2. Turn the actuator "ON"
the middle of your bicep
straps
your side
www.eksobionics.com
Advertisement
Related Manuals for Ekso Bionics EVO
Summary of Contents for Ekso Bionics EVO
- Page 1 Step 3: Put On Arm Cuffs Step 4: Turn on Ekso EVO 1. Position the arm cuff in 2. Tighten the arm cuff 1. Keep your arm down at 2. Turn the actuator “ON”...
- Page 2 Quick Start Guide Basic Fit Adjustments with Ekso EVO Step 1: Adjust the Torso Length 1. The top of the actuators should line 2. Press the button pin in, and slide 3. Use a different torso tube length if the torso tubes to adjust the length...
Need help?
Do you have a question about the EVO and is the answer not in the manual?
Questions and answers