Advertisement
Quick Links
Parts Name
Front
3
2
1
4
5
6
7
8
Film ejection slot
1
Light sensor
2
Flash lampface
3
Viewfinder
4
Shutter button
5
Lens/Lens cover
6
Self-portrait mirror
7
Lens barrel
8
Strap hook
9
Brightness indicator
10
Inserting Batteries
Caution
• Use new alkaline batteries of the same brand/type only (AA only).
• Do not use any batteries other than alkaline batteries.
• Replace both batteries in the following cases:
- When the red lamp on viewfi nder lights
- When no lamp lights or blinks even though the power is turned on
• About 100 pictures (roughly 10 packs of INSTAX mini fi lm) can be taken with new batteries.
• The battery performance may be reduced when it is cold. In this case, warm up the batteries to room temperature before using this camera.
• Use the supplied batteries for validation.
1
Push up the battery lid lock, then slide
off the battery cover.
Instant Camera
Instruc ons
Rear
14
13
9
15
10
16
11
17
12
Brightness adjustment dial
11
Power button
12
Flash charging lamp
13
Back cover lock
14
Film pack confirmation window
15
Back cover
16
Film counter
17
Eyepiece
18
Battery lid
19
Tabs (Back)
20
2
3
Insert two AA batteries matching the
C
and
D
polarities.
Close-up lens
18
9
20
19
Slide on the battery lid to close.
Advertisement
Related Manuals for FujiFilm INSTAX mini
Summary of Contents for FujiFilm INSTAX mini
- Page 1 - When no lamp lights or blinks even though the power is turned on • About 100 pictures (roughly 10 packs of INSTAX mini fi lm) can be taken with new batteries. • The battery performance may be reduced when it is cold. In this case, warm up the batteries to room temperature before using this camera.
-
Page 2: Loading The Instax Mini Film Pack
The fi lm can no longer be used. • Never use a fi lm pack beyond its shelf life; otherwise, it may damage the camera. • For details, refer to the instructions and warnings on FUJIFILM INSTAX mini fi lm. Press down the back cover lock... -
Page 3: Using The Close-Up Lens
Unloading the INSTAX mini fi lm pack When “0” is displayed on the fi lm counter, unload the fi lm pack following the procedure below and as indicated on the INSTAX mini fi lm pack instructions. Press down the back cover lock to Grasp the rectangular holes on the fi lm pack, then pull open the back cover. -
Page 4: Specifications
The fi lm pack won’t load 1 The fi lm pack is not for your 1 Use FUJIFILM INSTAX mini fi lm only. (No other fi lms can be used.) into your camera, or won’t camera. - Page 5 INSTAX mini FILM AND PRINT CARE See FUJIFILM INSTAX mini fi lm for fi lm use instructions. Follow all instructions for safe and proper use. 1 Keep the fi lm in a cool and dry place. Do not leavee the lm in a place where the temperature is extremely high (e.g., in a closed car).
Need help?
Do you have a question about the INSTAX mini and is the answer not in the manual?
Questions and answers