i. Tech Dynamic Clip III User Manual page 6

Pairing Your Headset
1. Place the headset and the mobile handset where they are easily
viewable and no more than 1 meter apart.
2. Ensure the headset is OFF.
3. Press and hold the MFB until the headset LED alternately flashes
blue and red.
4. Activate your mobile handset's Bluetooth function by referring to
your mobile handset user guide for details.
5. Set the mobile handset to search for Bluetooth devices within
a one meter range as instructed in the mobile handset user guide
and select "i.Tech Clip III" from the list.
6. Enter the preprogrammed passkey "0000" and press "OK" to pair
your headset and mobile handset. When the pairing is complete,
the headset LED will flash blue rapidly for 5 times followed by a
long beep.
7. Go back to your mobile handset's main menu. For certain mobile
handset models, a headset icon will be shown on the screen. You
should now be able to make and receive calls using your headset.
IMPORTANT If the pairing cannot be completed within 2 minutes
while the pairing mode is activated, the headset LED flashes purple
red with 3 beeps and the headset is turned off. Please repeat Steps
2 to 7 to pair the headset and the mobile handset again.
Using Your Headset
Answering a Call
To answer a call, wait for the headset and the buzzer to ring, then
press the MFB to accept the call or answer the call via your mobile
handset in the normal way.
If you want to stop the buzzer from ringing, press the Volume Key
once. The headset continues to ring.
Ending a Call
Press the MFB to end your call or end the call via your mobile
handset in the normal way.
Dialling from Your Mobile Handset
Simply make calls on your mobile handset in the normal way.
Muting a Call
Press the Volume Key for 2 seconds to mute your call and press the Volume
Key for 2 seconds to deactivate the muting function while conversation.