Table of Contents
Advertisement
Only change MediaDock 2000 sound IRQ and DMA
settings as a last resort. If you change the settings
to run a DOS application, you may need to change
the settings back to the defaults before running
Windows.
In some cases changing these settings can create
system conflicts. If you run into difficulties, change
your settings back to the defaults and call the appli-
cation manufacturer.
MediaDock 2000 default settings are as follows:
T
Board type: SoundBlaster Pro Compatible
T
IRQ: 5
T
DMA: 1
If your application indicates that it requires special settings,
proceed as follows.
1.
From the DOS prompt, type the following and press
Enter
Display the current IRQ and DMA settings by typing the
2.
following and pressing
The screen displays the current settings and the follow-
ing four options from which to choose.
3-10 Setting Up and Using the Software
!
CAUTION
to change to the MD2000 directory.
cd MD2000
Enter
esscfg
1) Set new IRQ channel
2) Set new DMA channel
3) Display current settings
4) Quit
.
Advertisement
Table of Contents
