Powering On - NEC VERSA MEDIADOCK 2000 User Manual

NOTE: If your NEC Versa 2000 computer has Win-
dows 95 installed, when you power up the computer
it automatically detects your new hardware.
However, you still need to see Chapter 3, "Setting
Up and Using the Software", to install audio drivers
and the online version of this user's guide.

Powering On

Your NEC Versa 2000 power button controls the power to
your MediaDock 2000.
Turn your MediaDock 2000 power on as follows:
Connect the power cable to the MediaDock 2000, and
1.
dock your NEC Versa 2000 computer as described in
the preceding sections.
2. Open your NEC Versa 2000 computer to the working
position, and locate the power button.
Power Button
Turning power on
Getting Started 2-9