Dragino SN50v3-LB User Manual

# (/xwiki/bin/view/Main/) v / Home (/xwiki/bin/view/Main/) v / User Manual for LoRaWAN End Nodes (/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/) v
/ SN50v3-LB LoRaWAN Sensor Node User Manual (/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/) v
SN50v3-LB LoRaWAN Sensor Node User Manual
Last modified by Xiaoling (/xwiki/bin/view/XWiki/Xiaoling) on 2023/09/26 08:52
LoHRaWAN 07
Seneor Mok
el BSIVELE
I
...m.. Tt
it
Rl
1484
Table of Contents:
¢ 1. Introduction
o 1.1 What is SN50v3-LB LoRaWAN Generic Node
o 1.2 Features
o 1.3 Specification
o 1.4 Sleep mode and working mode
o 1.5 Button & LEDs
o 1.6 BLE connection
o 1.7 Pin Definitions
o 1.8 Mechanical
o 1.9 Hole Option
* 2. Configure SN50v3-LB to connect to LoRaWAN network
o 2.1 How it works
o 2.2 Quick guide to connect to LoRaWAN server (OTAA)
o 2.3 Uplink Payload
= 2.3.1 Device Status, FPORT=5
= 2.3.2 Working Modes & Sensor Data. Uplink via FPORT=2
= 2.3.2.1 MOD=1 (Default Mode)
= 2.3.2.2 MOD=2 (Distance Mode)
= 2.3.2.3 MOD=3 (3 ADC + 12C)
= 2.3.2.4 MOD=4 (3 x DS18B20)
= 2.3.2.5 MOD=5(Weight Measurement by HX711)
= 2.3.2.6 MOD=6 (Counting Mode)
= 2.3.2.7 MOD=7 (Three interrupt contact modes)
= 2.3.2.8 MOD=8 (3ADC+1DS18B20)
= 2.3.2.9 MOD=9 (3DS18B20+ two Interrupt count mode)
= 2.3.2.10 MOD=10 (PWM input capture and output mode, Since firmware v1.2)
= 2.3.2.10.a Uplink, PWM input capture
= 2.3.2.10.b Downlink, PWM output
= 2.3.3 Decode payload
= 2.3.3.1 Battery Info
= 2.3.3.2 Temperature (DS18B20)
= 2.3.3.3 Digital Input
= 2.3.3.4 Analogue Digital Converter (ADC)
= 2.3.3.5 Digital Interrupt