Download Print this page

Updating The Ir (Infrared) Driver; Disabling Save-To-Disk; Using Pc Cards - NEC VERSA LXI - RELEASE NOTES Release Note

Advertisement

However, if you choose to modify the color settings to 256 colors, from either the default or any other
color setting, video corruption may occur upon system restart. If video corruption occurs, it is
necessary to reboot your system a second time to eliminate the corruption.

Updating the IR (infrared) Driver

Before using IR data transfer on your NEC Versa LXi, be sure to install the latest IR driver, v3.08R,
from the Application and Driver CD.
Follow these steps to install the latest IR driver.
Insert the Application and Driver CD into the CD-ROM drive.
1.
T
If autorun is enabled, the CD automatically runs.
T
If autorun is not enabled, double click the CD-ROM icon in Windows Explorer to launch the
CD.
Click the Drivers tab.
2.
Click on Latest Non-Logo'd IR Drivers.
3.
4.
Highlight Installation Instructions.
Click View.
5.
6.
Print out and follow the on-screen instructions to install the latest IR driver.

Disabling Save-to-Disk

To optimize system performance when using a hard disk drive in the VersaBay III, disable the
Save-to-Disk parameter in the Power Management section of the BIOS Setup utility as follows.
Press
1.
F2
Select Power Management Setup from the main menu.
2.
3.
At the Power Management Setup menu, select Auto Save-to-File and set it to Disabled.
Press
4.
Esc
5.
Select Save Settings and Exit.

Using PC Cards

Follow these guidelines when using PC cards on your NEC Versa LXi system.
T
After inserting a PC card into the PC card slot with the system powered on, the system
recognizes and loads the card driver. If the cursor toggles repeatedly between a pointer and
hourglass, click on the PC card icon on the lower right corner of the taskbar. Stop the PC card.
Eject and reinsert the PC card. The system loads the card and functions correctly.
T
When using PC storage cards with your NEC Versa LXi, do not change the default settings for
Power Button and Lid Close functions in Windows.
T
When using the Adaptec SlimSCSI PC card in the NEC Versa LXi, always have a device
attached to the card.
T
Do not swap PC cards between slots when the system is in Suspend mode.
4 NEC Versa LXi Release Notes
when booting the system to enter the BIOS Setup utility.
to return to the main menu.

Advertisement

loading

This manual is also suitable for:

Versa lxi