Advertisement
Quick Links
Hand Held Terminal Upgrade Kit
Overview
The 814-3118 Hand-Held Terminal (HHT) can be optionally loaded with controller firmware that enables controllers to be upgraded in the
field. The controller firmware needs to be identified when the HHT is ordered. The 814-3118 HHT can operate like a standard 814-3110 in the
"Slave Terminal" mode, but it also has support to upgrade products that support firmware updates through the HHT port. Previously, the
PL-440 was used for this function.
Note that only boards of the same type can be upgraded.
For example, MultiFlex 168 to MultiFlex 168 = YES, MultiFlex 168 to MultiFlex 168AO = NO.
HHT Device Front Keypad
The power switch determines if the HHT is in self-powered mode (BATT), ext power
1
(EXT), or if powered from a target device (HOST)
2
External Power Connector (9-12 VDC)
3
F2 - Main Menu
4
UP Arrow - moves to previous screen, editable field, or top screen
Right Arrow - selects the editable field starting from the bottom of the screen; selects
5
the last editable field from bottom to top
6
Enter - save into memory
7
Numeric keypad
8
Scrolls the list selection and scrolls through ASCII characters if in a text field
9
RS-485 Connector
10
Cancel - clears/erases text in the editable field; cancel overrides
11
DOWN Arrow - moves to the next screen, editable field, end of screen, or advances
Left Arrow - selects the first editable field from top of the screen, and next editable field
12
from to to bottom
13
F1 - Home screen
14
LCD - four lines of 16 characters
026-4219 R3
©2024 Copeland LP.
LEGEND
INSTRUCTION GUIDE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Copeland 814-3118
Summary of Contents for Copeland 814-3118
- Page 1 The 814-3118 Hand-Held Terminal (HHT) can be optionally loaded with controller firmware that enables controllers to be upgraded in the field. The controller firmware needs to be identified when the HHT is ordered. The 814-3118 HHT can operate like a standard 814-3110 in the “Slave Terminal”...
- Page 2 810-3065 MultiFlex 168AO is used in the example. To update an 810-3065 MultiFlex 168AO: Plug the 814-3118 into the RJ-11 jack on the 810-306x. After a couple of seconds you should see the following screen: To access the controller like a MultiFlex as a standard slave terminal, press the DOWN arrow to get the following screen: Press the right arrow and enter 2 to select option 1 - SLAVE TERMINAL.
- Page 3 At this point you can use the 814-3118 just like the standard 814-3110 HHT. Since the 814-3118 model has many different modes of operation, the user must specify the operation mode. If you want to upgrade the firmware in the controller, press and hold the F1 function key for at least 6 seconds. The home screen for the...
- Page 4 Ordering Information When ordering the HHT, the part numbers for the desired firmware must be included on the order. The order can contain only the 814-3118 HHT and up to four firmware part numbers. Contact your Copeland account manager for additional ordering information.
Need help?
Do you have a question about the 814-3118 and is the answer not in the manual?
Questions and answers