Copeland 814-3118 Instruction Manual

Hand Held Terminal
For MultiFlex Upgrade Kit
P/N 814-3118
Overview
The P/N 814-3118 MultiFlex Upgrade Hand Held (HHT) Terminal can operate like a standard 814-3110 HHT, but it also has support to upgrade
an 810-3064 MultiFlex 88 to an 810-3063 MultiFlex 88AO and 810-3066 MultiFlex 168 to an 810-3065 MultiFlex 168AO.
NOTE: It is recommended that MultiFlex I/O boards with versions lower than VER: 1.11F01 (before June 2003) be returned to the RG
department for upgrade. For example, VER: 1.00F01 and VER: 1.10F01 are lower than VER: 1.11F0, and have a possible risk of the board
becoming inoperable during HHT firmware upgrade.
HHT Device Front Keypad
The power switch determines if the HHT is in self-powered mode (BATT), ext power
1
(EXT), or if powered from a target device (HOST)
2 External Power Connector (9-12 VDC)
3 F2 - Main Menu
4 UP Arrow - moves to previous screen, editable field, or top screen
Right Arrow - selects the editable field starting from the bottom of the screen; selects
5
the last editable field from bottom to top
6 Enter - save into memory
7 Numeric keypad
8 Scrolls the list selection and scrolls through ASCII characters if in a text field
9 RS-485 Connector
10 Cancel - clears/erases text in the editable field; cancel overrides
11 DOWN Arrow - moves to the next screen, editable field, end of screen, or advances
Left Arrow - selects the first editable field from top of the screen, and next editable field
12
from to to bottom
13 F1 - Home screen
14 LCD - four lines of 16 characters
026-4218 R1
©2024 Copeland LP.
LEGEND
INSTRUCTION GUIDE