Advertisement
Using the USB CD-R/RW Drive
To use the USB CD-R/RW drive, follow these steps.
Insert the USB CD-R/RW drive into the stand that comes with the drive.
1.
2.
Connect the USB cable.
Plug the USB cable with the smallest USB connector into the back of the drive.
Plug the other end of the USB cable into the USB and power ports on your NEC
Versa LitePad tablet PC.
Power on your tablet PC, if it is not already on.
3.
If this is the first time the USB drive is connected, a New Hardware Found message
displays on your screen and a hardware driver automatically installs for your drive.
Press the eject button on the drive to open the drive tray. Put your CD on the tray, print
4.
side up.
5.
Close the drive tray. The CD autoplays if it has an auto start file. If it does not auto
start, launch the CD from My Computer.
Note
CD-R/RW media must be formatted before you use it. See the following sections to
install the NEC CD-RW software.
Windows XP running, use the Safely Remove Hardware function on the Windows XP
taskbar.
The NEC CD-RW Software CD contains applications for CD-RW functions. With this
software, you can use your CD-RW drive to create data and audio CDs and to write files
directly to a CD in the CD-R/RW drive.
See the following procedures to install and use the CD-RW software.
Loading NEC CD-RW Software
The NEC CD-RW Software CD contains the Roxio
the NEC CD-RW Software CD as follows.
1.
Insert the NEC CD-RW Software CD into the CD-R/RW drive (see the previous
section, "Using the CD-R/RW Drive"). The CD-RW software loads and displays the
Roxio Easy CD Creator 5 screen.
If the CD does not load automatically, continue as follows:
Double click
Double click the CD drive. The Roxio Easy CD Creator 5 screen appears.
2.
At the "The Roxio Easy CD Creator 5 CD has been detected..." window, click
install Easy CD Creator 5.
3.
At the Choose Setup Language window, click
The Easy CD Creator 5 Basic – InstallShield
4.
Click
Next
At the Setup Type window, select a Complete or Custom installation. Read the on-
5.
screen descriptions for each installation.
6.
Click
Next
When you remove the USB CD-R/RW drive from the system with
on the Windows
My Computer
to continue the installation.
and click
Install
to begin the installation.
NEC Versa LitePad Tablet PC USB CD-R/RW Drive 3
®
Easy CD Creator 5 application. Load
®
desktop.
OK
to select English (default setting).
®
Wizard window appears.
Yes
to
Advertisement
