Download Print this page

NEC VERSA LITEPAD TABLET PC USB CR-R-RW DRIVE Manual page 2

For versa litepad tablet pc

Advertisement

Eject Button — Opens the drive tray. Press this button to open the tray and load or
remove a CD from the drive.
Drive Status LED — Lights during data read and write data operations. When the LED
is lit, do not open the drive tray, unplug the USB cable, or turn off the NEC Versa
LitePad™ tablet PC. Doing so might cause the loss of data from the CD.
USB Cable Connectors — Connect the USB cable end with the smaller interface
connector to the USB drive; connect the other end to the USB/power ports on the NEC
Versa LitePad tablet PC.
Emergency Eject Hole — Allows you to manually open the drive tray and remove a
disc from the drive if the Eject button function is disabled by software or a power
failure.
To open the tray and remove a disc in an emergency, use the emergency eject tool at the
rear of the drive. Press the tool into the hole to release the tray.
Stand — Install the USB CD-R/RW drive in the stand to save space on your desk or
table.
Ease of use — Connect or disconnect the USB CD-R/RW drive at any time, with tablet
PC power on or off (see the next section).
2 NEC Versa LitePad Tablet PC USB CD-R/RW Drive
USB CD-R/RW drive cable connectors
A – USB IF/Power Cable (drive end of cable)
B – USB Drive Connectors (at rear of drive)
USB CD-R/RW drive — bottom feature
A – Emergency Eject Tool

Advertisement

loading

This manual is also suitable for:

Usb cd-r/rw drive