JetBeam E26 KUNAI User Manual page 3

UV Version
UV
User Manual
Thanks for Your Purchase
www.jetbeamlight.com
Features
Three light modes , free change
Ÿ
Luminus SST40 LED , up to 2000lumens
Ÿ
Ÿ The flashlight uses Crystal Coating
Technology, combined with a brand-new
digital optical system designed light cup,
achieving a range of up to 165 meters.
1700mah Li-polymer battery built-in
Ÿ
Ÿ 4 ultra-high hardness zirconia ceramic beads
on the top of strike bezel , helps break
window easily and quickly
Type C quick charging port
Ÿ
Digital constant current drive circuit, with a
Ÿ
maximum runtime of up to 65 hours
4 constant brightness modes + strobe +
Ÿ
UV+green laser
New IC circuit design , double protection for
Ÿ
LED and battery for a longer life and safer
use .
Double-side coated and scratch-resistant
Ÿ
optical lens
Product shell is made of aviation aluminum
Ÿ
alloy
Ÿ Anti-abrasive surface finished with HA III
hard anodization
IPX-8 water proof (underwater 2 meters)
Ÿ
1.5 meters drop test
Ÿ
Specification
LED : Luminus SST40*2 + 365nm UV
Ÿ
+520nm green laser*1
Ÿ Max Lumen : 2000lumen
Reflector Cup : orange reflector cup
Ÿ
Lens : coated mineral glass
Ÿ
Ÿ Flashlight body material : aviation aluminum
alloy
Ÿ Flashlight surface finished : military H III hard
anodization
Battery Type : li-polymer battery
Ÿ
Switch : tail switch + side switch + revolving
Ÿ
switch
Length : 131mm
Ÿ
Ÿ Width : 32mm
Thickness : 16mm
Ÿ
Weight : 115g( battery included)
Ÿ
385x120mm
Output & Runtime
Green
Turbo High Medium Low UV
laser
2000 700 300 15 1300
LM LM LM LM mw mw
1.6h 1.7h 3.5h 65h 3h 15h
165m
6800cd
1.5m
IPX8
Extra Accessories Included:
• USB Charging Cable
• Tactical Clip
• Lanyard
1, The above data is measured according to the
international flashlight measurement standard
ANSI/NEMA, FL1-described measurement
method, and obtained by testing with built-in li-
polymer batteries in the laboratory. Different
batteries or environments may affect the above
data.
2, After 30 seconds of being turned on at high
brightness, the flashlight will activate the
automatic downshift function to prevent
overheating and effectively protect the LED
lifespan. When the temperature is too high, the
flashlight will gradually downshift until the
brightness is below 70%. If you need to use the
high-brightness mode again, simply turn off the
flashlight and turn it on again.
Do Not Expose Laser Light to Human Eyes.
User Operation
Power On/Off: Single-c
Strobe
side switch.
5 2000
LM
Tail Tactical Switch: ex
the tail tactical switch ca
access the maximum br
turning on the flashlight
switch, the side switch c
modes and turn off the fl
Revolving Switch: 4 mo
Light ↔ White Light + G
Laser. To prevent accide
revolving switch is sligh
recommended to operat
Lock : the flashlight is tu
is ineffective. unlock the
tactical tail switch does
flashlight will restore hig
Side Switch:
1,White Light: When re
points to white light, pre
to turn on the white light
switch to change modes
and ultra high (cycling a
function).
2,UV: When revolving sw
UV, press the side switc
UV light.
3, Laser: When revolvin
to laser, press the side s
the laser(≤5mw).
Strobe: fast slightly tou
switch twice.