Table of Contents
Advertisement
A – Large USB Connector
for the NEC Versa
Once the USB cable is removed, the USB port is visible.
3.
Attach the small connector end of the USB cable to the back side of the USB PortBar.
4.
Attach the larger connector end of the USB cable to the USB port on the NEC Versa.
Connecting the USB PortBar to your NEC Versa
Your USB PortBar is now properly attached to your NEC Versa.
5.
4 NEC USB PortBar with the Driver Installation Diskette
Removing the USB cable from the PortBar
Location of USB Port
A – USB Port
B – Small USB Connector
for the USB PortBar
Advertisement
Table of Contents
Need help?
Do you have a question about the USB PORTBAR and is the answer not in the manual?