Advertisement
Advertisement
Table of Contents
Related Manuals for Hurricane W06-0003
Summary of Contents for Hurricane W06-0003
- Page 1 W06-0003 Instruction Manual...
-
Page 2: Specification
2.5T LOW ENTRY RAPID LIFT TROLLEY JACK Specification • Capacity: 2.5 Ton • Minimum Lift Height: 75mm • Maximum Height: 500mm • Length: 685mm • Weight 32.4kg • Stroke: 425mm • Pumps to Max Height: 6 to 7 • Diameter: 790 x 405 x 165mm Features &... -
Page 3: Safety Information
Safety Information • This trolley jack is designed to lift, but not support one end of a vehicle. Immediately after lifting, loads must be supported by a pair of appropriately rated axle stands. • Important: Read these instructions carefully. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &... - Page 4 Caution • Locate the jack in a suitable working area. • Inspect the jack before each use. Do not use jack if damaged, altered, modified, in poor condition, leaking hydraulic fluid or unstable due to loose or missing hardware or parts. •...
-
Page 5: Troubleshooting
• When not in use store the jack, fully lowered in a safe, dry, childproof location. • The warnings, precautions & instructions discussed in this manual cannot cover all possible conditions & situations that may occur. The operator must understand that common sense & caution are factors, which cannot be built into this product, but must be given by the operator. - Page 6 Assembly • Visually inspect all components for shipping damage. If any shipping damage is found, notify the place of purchase & DO NOT use this jack. • Your jack has been shipped with a retaining block to hold the yoke in the downward position.
-
Page 7: Hydraulic System Purging
Hydraulic System Purging • Open the release valve by turning it two full turns counter-clockwise. • Pump the handle a minimum of four full strokes quickly. • Close the release valve by turning it clockwise. • Pump the handle with full strokes to check if it can reach the maximum height within seven pumps. - Page 8 Operation Instructions: WARNING! Before use ensure you have read, understood section 1 safety instruction. IMPORTANT: Before use, the operator is to visually inspect the jack for cracked welds, damaged or missing parts or hydraulic leak. Raising a vehicle: • Ensure that the jack & the vehicle are on a hard, level surface. •...
- Page 9 Raising a vehicle with the foot pedal: • Ensure the vehicle is properly balanced on lift saddle platform. • While watching to make sure it is safe to do so, push the pump pedal downward repeatedly to lift the vehicle to the desired height. Lowering a vehicle: •...
-
Page 10: Exploded View And Parts List
Exploded View & Parts List... - Page 11 Part No. Description Qty. Part No. Description Qty. Handle Tube 1 Front Wheel Bolt Washer Handle Tube 2 Retaining Ring Handle Foam Pump Retaining Ring Spring Handle Socket Screw Retaining Ring Roller Rod Assy Bolt Tool Tray Rear Caster Limiting Bar Retaining Ring Right Adjust Plate Lift Arm Shaft...
- Page 12 Serenco UK Ltd Unit 3 Wellingborough Rd Northampton NN6 0BN Phone: 01604 790982 Fax: 01604 790929 Web: www.serenco.co.uk E-mail: sales@serenco.co.uk NOTE: It is our policy to continually improve products & as such we reserve the right to alter data, specifications & component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this product.
Need help?
Do you have a question about the W06-0003 and is the answer not in the manual?
Questions and answers