Water Tank; Ice Making Operation - Euhomy IM-FM Instruction Manual

Add water to ice maker
Method 1: Manually add water:
Insert the "water tank" into the
corresponding position on the top of the
machine, open the "water tank cover",
pour drinking water, the water level
should be lower than the "MAX" mark
line, and then cover the "water tank
cover" to prevent foreign matter from
entering the water tank. As shown in
the picture on the right:

Ice making operation

Operation and display areas
1. Ice making startup: Plug in the power plug, the display symbol
the " " key on the operation panel, water will be added to the water tank through the electromagnetic
water valve, after reaching the standard water level, the unit starts to make ice, the symbol
"and" D "are steady on, steady" 0 D ", means that the ice is made at the default time;
After a few minutes of ice making work, there will be a flashing number and symbol "M", and the flashing
number "10M" means that it will take 10 minutes for the ice making to end.
2. After each ice making is finished, the unit will start to harvest the ice cube, and the ice making
symbol will be shining. Water will be added to the tank through the electromagnetic water valve
until it reaches the standard water level of the tank, and the unit will enter the next ice making cycle;
when the water added to the tank cannot reach the standard water level of the tank, the symbol
will be steady on, and the unit will stop working. After a water shortage, it is necessary to restart the
machine, otherwise it will wait for about 15 minutes and automatically start up.
06
Cover of th e
water reser v oir

Water tank

will start to be steady on, press
and" 0