Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lambrecht 14627
Summary of Contents for Lambrecht 14627
- Page 1 INSTALL ATION GUIDE 14627 Traverse System...
-
Page 2: Warranty
Warranty Please note the loss of warranty and non-liability by unauthorized manipulation of the system. You need a written permission of the LAMBRECHT meteo GmbH for changes of system components. These activities must be operated by a qualified technician. The warranty does not cover: Mechanical damages caused by external impacts (e.g. -
Page 3: Required Accessory
LAMBRECHT meteo | 14627 Eventually further tools for the mounting of the sensors will be needed. For more information please have a look at the operating instructions of the appropriate sensors. Because the installation takes place in a dangerous height, the assembly personal must follow the rules for prevention of accidents. - Page 4 LAMBRECHT meteo | 14627 Preparation of the traverse for mounting For mounting the traverse at the mast fixation use bores B1 and B4 (see fig. 1). Mount the grub screws and slot nuts as shown in fig. 2. Insert the slot nuts and slightly screw the grub screws into the slot nuts. Align the grub screws at the bores of the mast fixation and fix them by tighten them firmly.
- Page 5 LAMBRECHT meteo | 14627 Preparing tightening straps and spanner nuts After having completed the traverse for mounting prepare two tightening straps and spanner nuts for mounting of the mast fixation. We recommend turning the tightening strap around the mast and shorten it to the appropriate length plus 100 mm.
- Page 6 LAMBRECHT meteo | 14627 Mounting of the mast fixation at the mast Hold the mast fixation to the desired position of the mast in order to choose the right cutout for the check rail of the tightening straps. As a result you get a good transition between mast, mast fixation and tightening straps (see fig. 5).
- Page 7 LAMBRECHT meteo | 14627 Mounting of the prepared traverse Afterwards the prepared traverse can be mounted at the mast fixation. lock washer Fig. 7 Fixing the sensor cables In the end lead all the cables within the traverse to the mast and fix them with cable binder.
- Page 8 LAMBRECHT meteo | 14627 Components Id No. Description Scope of delivery 32.14627.001000 Set Mast fixation Consisting of: 1 Mast fixation 1 m Tightening strap stainless steel 2 Spanner nuts 2 Grub screws M 8 x 30 DIN 913 2 Lock washer 8.4...
- Page 9 LAMBRECHT meteo | 14627 Disposal LAMBRECHT meteo GmbH is listed and registered at the Stiftung Elektro-Altgeräte Register ear under: WEEE-Reg.-Nr. DE 45445814 In the category of monitoring and control instruments, device type: “Monitoring and control instruments for exclusively commercial use”.
Need help?
Do you have a question about the 14627 and is the answer not in the manual?
Questions and answers