Delayed Washing; Partial Cycle & Combination - NEC NW-452 Instruction Manual

Delayed Washing

Delayed washing can be made from 2 hours to 48 hours.
•
For example, to delay wash start time by 8 hours;
Procedure to press the button.
•
Select the program.
Select water level
and water temperature.
Now the reservation is made.
•
If you want to check the selected program, press the "START/HOLD" button again.
•
PARTIAL CYCLE & COMBINATION
WASH TIMES CONTROL
CYCLE
• As the control button is pressed, wash time will repeat as
follows;
12
CONTROL
• If you don't want the wash cycle, you must adjust wash the time to 0 min..
RINSE TIMES CONTROL
• As the control button is pressed, rinse times will be repeated as
CYCLE
following;
2
• If you don't want the rinse cycle, you must adjust the rinse times to 0 times.
CONTROL
SPIN TIME CONTROL
• As the control button is pressed, spin times will be repeated as follows;
CYCLE
5
• If you don't want the spin cycle, you must adjust the spin time to 0 min..
CONTROL
CONVENIENT OPERATION FOR SPIN ONLY
• If you want spin only, it is convenient to operate
the button as following;
DELAY
MIN
HOURS
"--" shall blink
15 18 0 6 9min.
3 4 0 1 time(s)
7 9 0 1 3min.
10
DELAY
MIN
HOURS
Select "8"
CONTROL